Bumpers and Edges
Review Bumpers and Edges Machine Safety components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Length | Profile (W x H) | Material | Operating Force | Actuation Angle | Inactive End Region | Cable Length | Operating Temperature | Ingress Protection | Approval Agency |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SGE-225-2-1300 05000CSGE-225-2-1300 05000C SFTY EDGE |
3,367 |
|
Datasheet | SGE | Bulk | Obsolete | 4.265' (1.30m) | 0.98" x 0.98" (25.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 19.56lbs (8.87kg) | ±30° | 1.57" (40.0mm) | 16.404' (5.00m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-245-0-1030 02000C-02000CSGE-245-0-1030 02000C-02000C |
3,090 |
|
Datasheet | SGE | Bulk | Obsolete | 3.379' (1.03m) | 0.98" x 1.77" (25.0mm x 45.0mm) | Ethylene Propylene Diene Monomer (EPDM) | 26.52lbs (12.03kg) | ±45° | 0.79" (20.0mm) | 6.562' (2.00m) x 2 | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-1510-4-0540L 00300MEDGE SENSOR |
4,352 |
|
Datasheet | * | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - |
|
|
SGE-125-2-0740 03000CSAFETY EDGE |
3,488 |
|
Datasheet | * | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - |
|
|
SGE-225-2-1500 05000CSGE-225-2-1500 05000C SFTY EDGE |
3,384 |
|
Datasheet | SGE | Bulk | Obsolete | 4.921' (1.50m) | 0.98" x 0.98" (25.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 19.56lbs (8.87kg) | ±30° | 1.57" (40.0mm) | 16.404' (5.00m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-1510-3-0310A 00700M-00700FSGE-1510-3-0310A 00700M-00700F |
1,458 |
|
Datasheet | SGE | Bulk | Obsolete | 1.017' (0.31m) | 0.59" x 0.39" (15.0mm x 10.0mm) | Thermoplastic Elastomer (TPE) | 19.78lbs (8.97kg) | ±20° | 0.98" (25.0mm) | 2.297' (0.70m) x 2 | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-125-0-0950 05000C-05000CSAFETY EDGE |
4,136 |
|
Datasheet | SGE | Bulk | Obsolete | 3.117' (0.95m) | 0.59" x 0.98" (15.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 9.44lbs (4.28kg) | ±30° | 0.79" (20.0mm) | 16.404' (5.00m) x 2 | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE, TUV |
|
|
SGE-125-2-0950 05000CSAFETY EDGE |
3,309 |
|
Datasheet | SGE | Bulk | Obsolete | 3.117' (0.95m) | 0.59" x 0.98" (15.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 9.44lbs (4.28kg) | ±30° | 0.79" (20.0mm) | 16.404' (5.00m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE, TUV |
|
|
SGE-125-2-0940 00200CSAFETY EDGE |
3,137 |
|
Datasheet | SGE | Bulk | Obsolete | 3.084' (0.94m) | 0.59" x 0.98" (15.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 9.44lbs (4.28kg) | ±30° | 0.79" (20.0mm) | 0.656' (0.20m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE, TUV |
|
|
SGE-225-0-1400 10000C-01000CSGE-225-0-1400 10000C-01000C |
4,760 |
|
Datasheet | SGE | Bulk | Obsolete | 4.593' (1.40m) | 0.98" x 0.98" (25.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 19.56lbs (8.87kg) | ±30° | 1.57" (40.0mm) | 32.808' (10.00m), 3.281' (1.00m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
Frequently Asked Questions
What are Bumpers and Edges components used for?
Bumpers and Edges components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Bumpers and Edges part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Bumpers and Edges parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.