Bumpers and Edges
Review Bumpers and Edges Machine Safety components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Length | Profile (W x H) | Material | Operating Force | Actuation Angle | Inactive End Region | Cable Length | Operating Temperature | Ingress Protection | Approval Agency |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SGE-1510-2-1350A 03100CSGE1510-2-1350A-3100C |
2,668 |
|
Datasheet | SGE | Bulk | Obsolete | 4.429' (1.35m) | 0.59" x 0.39" (15.0mm x 10.0mm) | Thermoplastic Elastomer (TPE) | 19.78lbs (8.97kg) | ±20° | 0.98" (25.0mm) | 10.171' (3.10m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-225-0-0180 00300C-05000CSGE-225-0-0180 00300C-05000C |
4,064 |
|
Datasheet | SGE | Bulk | Obsolete | 0.591' (0.18m) | 0.98" x 0.98" (25.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 19.56lbs (8.87kg) | ±30° | 1.57" (40.0mm) | 0.984' (0.30m), 16.404' (5.00m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-88-0-2500 01000C-01000CSGE88-0-2500-1000C-1000C |
1,350 |
|
Datasheet | SGE | Bulk | Obsolete | 8.202' (2.50m) | 0.31" x 0.31" (8.0mm x 8.0mm) | Ethylene Propylene Diene Monomer (EPDM) | 15.74lbs (7.14kg) | ±10° | 0.79" (20.0mm) | 3.281' (1.00m) x 2 | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
SGE-1510-0-1500A 05000C-05000CSGE1510-0-1500A-5000C-5000C |
1,560 |
|
Datasheet | SGE | Bulk | Obsolete | 4.921' (1.50m) | 0.59" x 0.39" (15.0mm x 10.0mm) | Thermoplastic Elastomer (TPE) | 19.78lbs (8.97kg) | ±20° | 0.98" (25.0mm) | 16.404' (5.00m) x 2 | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-1510-2-1070A 02500CSGE1510-2-1070A-2500C |
2,751 |
|
Datasheet | SGE | Bulk | Obsolete | 3.510' (1.07m) | 0.59" x 0.39" (15.0mm x 10.0mm) | Thermoplastic Elastomer (TPE) | 19.78lbs (8.97kg) | ±20° | 0.98" (25.0mm) | 8.202' (2.50m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-1510-5-0150L 07600C-00150FSGE-1510-5-0150L 07600C-00150F |
4,076 |
|
Datasheet | SGE | Bulk | Obsolete | 0.492' (0.15m) | 0.59" x 0.39" (15.0mm x 10.0mm) | Thermoplastic Elastomer (TPE) | 19.78lbs (8.97kg) | ±20° | 0.98" (25.0mm) | 24.934' (7.60m), 0.492' (0.15m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-225-0-0610 01000C-01000CSGE-225-0-0610 01000C-01000C |
3,125 |
|
Datasheet | SGE | Bulk | Obsolete | 2.001' (0.61m) | 0.98" x 0.98" (25.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 19.56lbs (8.87kg) | ±30° | 1.57" (40.0mm) | 3.281' (1.00m) x 2 | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SESP-MT-1220SCS3580 SPECIAL ALUMINUM MTG 2 |
2,400 |
|
Datasheet | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - |
|
|
SGE-225-0-0750 05000C-05000CSGE-225-0-0750 05000C-05000C |
1,624 |
|
Datasheet | SGE | Bulk | Obsolete | 2.461' (0.75m) | 0.98" x 0.98" (25.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 19.56lbs (8.87kg) | ±30° | 1.57" (40.0mm) | 16.404' (5.00m) x 2 | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
|
|
SGE-225-2-0750 00500CSGE-225-2-0750 00500C SFTY EDGE |
3,922 |
|
Datasheet | SGE | Bulk | Obsolete | 2.461' (0.75m) | 0.98" x 0.98" (25.0mm x 25.0mm) | Thermoplastic Elastomer (TPE) | 19.56lbs (8.87kg) | ±30° | 1.57" (40.0mm) | 1.640' (0.50m) | -10°C ~ 55°C | IP65 - Dust Tight, Water Resistant | CE |
Frequently Asked Questions
What are Bumpers and Edges components used for?
Bumpers and Edges components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Bumpers and Edges part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Bumpers and Edges parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.