Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSX631ILTIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,382 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 1.6 mV | 45µA | 92 mA | 3.3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LS204IDIC OPAMP GP 2 CIRCUIT 8SOIC |
2,405 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 1.5V/µs | 3 MHz | - | 50 nA | 500 µV | 700µA | 23 mA | 6 V | 30 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOIC |
|
TS274AIDIC CMOS 4 CIRCUIT 14SO |
3,876 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | - | 5.5V/µs | 3.5 MHz | - | 1 pA | 900 µV | 1mA | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
TS1872ISTIC OPAMP GP 2 CIRCUIT 8MINISO |
3,065 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.6V/µs | 1.8 MHz | - | 70 nA | 100 µV | 500µA (x2 Channels) | 80 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
|
TSV911AIYDTIC OPAMP GP 1 CIRCUIT 8SOIC |
4,298 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 4.5V/µs | 8 MHz | - | 1 pA | 1.5 mV | 820µA | 35 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TSV632AILTIC OPAMP GP 2 CIRCUIT SOT23-8 |
1,541 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.34V/µs | 880 kHz | - | 1 pA | 800 µV | 50µA (x2 Channels) | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-8 |
|
|
TS934BIDIC OPAMP GP 4 CIRCUIT 14SO |
2,027 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.05V/µs | 100 kHz | - | 1 pA | 2 mV | 20µA (x4 Channels) | 5 mA | 2.7 V | 10 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
TS1872AIPTIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,907 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.6V/µs | 1.8 MHz | - | 70 nA | 1 mV | 500µA (x2 Channels) | 80 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP |
|
TS925AINIC OPAMP GP 4 CIRCUIT 16DIP |
1,430 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 1.3V/µs | 4 MHz | - | 15 nA | 900 µV | 6mA | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Through Hole | 16-DIP |
|
|
TS925INIC OPAMP GP 4 CIRCUIT 16DIP |
1,428 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 1.3V/µs | 4 MHz | - | 15 nA | 3 mV | 6mA | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Through Hole | 16-DIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.