Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LS204IYDTIC OPAMP GP 2 CIRCUIT 8SOIC |
2,951 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 1.5V/µs | 3 MHz | - | 50 nA | 500 µV | 700µA | 23 mA | 6 V | 30 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOIC |
|
TS27M2ACPTIC CMOS 2 CIRCUIT 8TSSOP |
4,110 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 2 | - | 0.6V/µs | 1 MHz | - | 1 pA | 900 µV | 150µA (x2 Channels) | 45 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-TSSOP |
|
TSH84IPTIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,273 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 118V/µs | 65 MHz | 100 MHz | 6 µA | 800 µV | 9.8mA | 55 mA | 4.5 V | 12 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
TSV6292ILTIC CMOS 2 CIRCUIT SOT23-8 |
2,489 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Obsolete | CMOS | 2 | Rail-to-Rail | 0.5V/µs | 1.3 MHz | - | 1 pA | 4 mV | 29µA | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
|
|
TSV6392ILTIC CMOS 2 CIRCUIT SOT23-8 |
3,453 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Obsolete | CMOS | 2 | Rail-to-Rail | 1.1V/µs | 2.4 MHz | - | 1 pA | 3 mV | 50µA | 72 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
|
TSH300ILTIC OPAMP VFB 1 CIRCUIT SOT23-5 |
2,353 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | - | 230V/µs | - | 200 MHz | 30 µA | 500 µV | 15.3mA | 82 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TS27M4IDTIC CMOS 4 CIRCUIT 14SO |
4,480 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | - | 0.6V/µs | 1 MHz | - | 1 pA | 1.1 mV | 150µA (x4 Channels) | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
|
TS274ACDTIC CMOS 4 CIRCUIT 14SO |
1,847 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | - | 5.5V/µs | 3.5 MHz | - | 1 pA | 900 µV | 1mA | 45 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
|
TSH74CDTIC OPAMP GP 4 CIRCUIT 14SO |
4,776 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 118V/µs | 65 MHz | 100 MHz | 6 µA | 1.1 mV | 8.2mA | 55 mA | 3 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
TS1852AINIC OPAMP GP 2 CIRCUIT 8MINI DIP |
4,465 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.25V/µs | 630 kHz | - | 16 nA | 3 mV | 162µA | 48 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Through Hole | 8-Mini DIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.