Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
1718860000CABLE GLND 17.02-27MM PG29 BRASS |
4,163 |
|
Datasheet | Cable Gland | 0.670" (17.02mm) | 1.063" (27.00mm) | PG29 | 0.315" (8.00mm) | - | - | Brass, Nickel Plated | Seal, Strain Relief | Silver | IP54 - Dust Protected, Water Resistant | -20°C ~ 80°C | |
|
|
1778490000CABLE GLAND 17.02-27MM M32 BRASS |
1,401 |
|
Datasheet | Cable Gland | 0.670" (17.02mm) | 1.063" (27.00mm) | M32x1.5 | 0.315" (8.00mm) | - | - | Brass, Nickel Plated | Seal, Strain Relief | Silver | IP54 - Dust Protected, Water Resistant | -20°C ~ 80°C | |
|
1009870000CABLE GLAND 10-14MM M25 S STEEL |
2,126 |
|
Datasheet | Cable Gland | 0.394" (10.00mm) | 0.551" (14.00mm) | M25 | 0.315" (8.00mm) | - | - | Stainless Steel | - | Silver | IP54/IP66/IP67/IP68/IP69K - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1009880000CABLE GLAND 13-18.01MM M32 |
1,749 |
|
Datasheet | Cable Gland | 0.512" (13.00mm) | 0.709" (18.01mm) | M32 | 0.354" (9.00mm) | - | - | Stainless Steel | - | Silver | IP54/IP66/IP67/IP68/IP69K - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1193580000CABLE GLAND M32 S STEEL |
1,598 |
|
Datasheet | Cable Gland | - | - | M32 | 0.315" (8.00mm) | - | - | Stainless Steel | - | Silver | IP54/IP66/IP67/IP68/IP69K - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 130°C | |
|
|
1909950000CABLE GLAND 27-38MM M50 BRASS |
2,495 |
|
Datasheet | Cable Gland | 1.063" (27.00mm) | 1.496" (38.00mm) | M50x1.5 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | Seal | Silver | IP54/IP66/IP67/IP68/IP69K - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1772270000CABLE GLAND 34-44MM M63 BRASS |
2,550 |
|
Datasheet | Cable Gland | 1.339" (34.00mm) | 1.732" (44.00mm) | M63 | 0.551" (14.00mm) | - | - | Brass, Nickel Plated | Seal | Silver | IP54/IP66/IP67/IP68 - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1009890000CABLE GLAND 18.01-25MM M40 |
4,794 |
|
Datasheet | Cable Gland | 0.709" (18.01mm) | 0.984" (25.00mm) | M40 | 0.354" (9.00mm) | - | - | Stainless Steel | - | Silver | IP54/IP66/IP67/IP68/IP69K - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1776720000CABLE GLAND 10-14MM M20 POLYAMID |
3,983 |
|
Datasheet | Cable Gland | 0.394" (10.00mm) | 0.551" (14.00mm) | M20 | 0.591" (15.00mm) | - | - | Polyamide (PA6), Nylon 6 | Strain Relief | Gray | IP68 - Dust Tight, Waterproof | -20°C ~ 100°C | |
|
|
1718830000CABLE GLAND 6.5-12.5MM PG13.5 |
3,695 |
|
Datasheet | Cable Gland | 0.256" (6.50mm) | 0.492" (12.50mm) | PG13.5 | 0.256" (6.50mm) | - | - | Brass, Nickel Plated | Seal, Strain Relief | Silver | IP54 - Dust Protected, Water Resistant | -20°C ~ 80°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.