Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
1909910000CABLE GLAND 5-10MM M16 BRASS |
4,543 |
|
Datasheet | Cable Gland | 0.197" (5.00mm) | 0.394" (10.00mm) | M16 | 0.276" (7.00mm) | - | - | Brass, Nickel Plated | Seal | Silver | IP54/IP66/IP67/IP68 - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
1193600000CABLE GLAND M25 BRASS |
3,676 |
|
Datasheet | Cable Gland | - | - | M25 | 0.295" (7.50mm) | - | - | Brass, Nickel Plated | - | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 130°C | |
|
|
1569090000CABLE GLAND 6-12MM PG13.5 BRASS |
2,472 |
|
Datasheet | Cable Gland | 0.236" (6.00mm) | 0.472" (12.00mm) | PG13.5 | 0.256" (6.50mm) | - | - | Brass, Nickel Plated | Seal | Silver | IP54/IP66/IP67/IP68/IP69K - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1772250000CABLE GLAND 19.05-25MM M40 BRASS |
1,655 |
|
Datasheet | Cable Gland | 0.750" (19.05mm) | 0.984" (25.00mm) | M40x1.5 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | Seal | Silver | IP54/IP66/IP67/IP68/IP69K - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1460040000CABLE GLAND 3-12MM M16 BRASS |
1,981 |
|
Datasheet | Cable Gland | 0.118" (3.00mm) | 0.472" (12.00mm) | M16 | 0.630" (16.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1009570000VG M25-MS54 ZR 8.5-18 |
4,500 |
|
Datasheet | Cable Gland | 0.335" (8.50mm) | 0.709" (18.01mm) | M25 | 0.276" (7.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP54 - Dust Protected, Water Resistant | -20°C ~ 80°C | |
|
1569040000CABLE GLAND 22.1-32MM PG36 |
1,265 |
|
Datasheet | Cable Gland | 0.870" (22.10mm) | 1.260" (32.00mm) | PG36 | 0.512" (13.00mm) | - | - | Polyamide (PA6), Nylon 6 | Seal | Gray | IP67/IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
1909940000CABLE GLAND 19-28MM M40 BRASS |
1,089 |
|
Datasheet | Cable Gland | 0.748" (19.00mm) | 1.102" (28.00mm) | M40 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | Seal | Silver | IP54/IP66/IP67/IP68 - Dust Protected, Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
2435150000CABLE GLAND 6-12MM M20 BRASS |
1,772 |
|
Datasheet | Cable Gland | 0.236" (6.00mm) | 0.472" (12.00mm) | M20 | 0.236" (6.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1460050000CABLE GLAND 3-12MM M20 BRASS |
4,265 |
|
Datasheet | Cable Gland | 0.118" (3.00mm) | 0.472" (12.00mm) | M20 | 0.630" (16.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.