Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
K258-1016-00WADI HEAT EMC-CABLE GLAND M16 ST |
1,007 |
|
Datasheet | Cable Gland | 0.197" (5.00mm) | 0.413" (10.50mm) | M16x1.5 | 0.276" (7.00mm) | - | - | Stainless Steel | - | Silver | IP66/IP67/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 200°C | |
|
50.625 M/BSCABLE GLAND 11-16MM M25 BRASS |
3,756 |
|
Datasheet | Cable Gland | 0.433" (11.00mm) | 0.630" (16.00mm) | M25x1.5 | 0.276" (7.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal, Strain Relief | Silver | IP68 - Dust Tight, Waterproof | -20°C ~ 100°C | |
|
|
K102-1032-50-EXPERFECT PLUS EMC-EX-CABLE GLAND |
3,564 |
|
Datasheet | Cable Gland | 0.433" (11.00mm) | 0.827" (21.00mm) | M32x1.5 | 0.551" (14.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 85°C | |
|
|
101021M25ESWADI CABLE GLAND METRIC - STAINL |
3,973 |
|
Datasheet | Cable Gland | 0.512" (13.00mm) | 0.787" (20.00mm) | M25x1.5 | 0.295" (7.50mm) | - | - | Stainless Steel | - | Silver | IP65 - Dust Tight, Water Resistant | -30°C ~ 100°C | |
|
|
K100-1040-00-EXPERFECT PLUS EX-CABLE GLAND M40 |
2,665 |
|
Datasheet | Cable Gland | 0.630" (16.00mm) | 1.102" (28.00mm) | M40x1.5 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 85°C | |
|
|
K258-1020-00WADI HEAT EMC-CABLE GLAND M20 ST |
1,872 |
|
Datasheet | Cable Gland | 0.315" (8.00mm) | 0.591" (15.00mm) | M20x1.5 | 0.315" (8.00mm) | - | - | Stainless Steel | - | Silver | IP66/IP67/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 200°C | |
|
|
K253-1025-00WADI ONE EMC-CABLE GLAND M25 STA |
4,402 |
|
Datasheet | Cable Gland | 0.492" (12.50mm) | 0.807" (20.50mm) | M25x1.5 | 0.315" (8.00mm) | - | - | Stainless Steel | - | Silver | IP66/IP68/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
50.650 MFK1PERFECT CABLE GLAND BRASS FOR FL |
2,364 |
|
Datasheet | Cable Gland | - | - | M50x1.5 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP54 - Dust Protected, Water Resistant | -40°C ~ 100°C | |
|
50.640 Y/EMVCABLE GLAND 19-27MM M40 BRASS |
2,089 |
|
Datasheet | Cable Gland | 0.748" (19.00mm) | 1.063" (27.00mm) | M40x1.5 | 0.315" (8.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
50.036/EMVPERFECT EMC-CABLE GLAND PG 36 NI |
3,438 |
|
Datasheet | Cable Gland | 0.945" (24.00mm) | 1.260" (32.00mm) | PG36 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.