Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
K161-1040-00WADI RAIL EMC-CABLE GLAND M40 NI |
1,707 |
|
Datasheet | Cable Gland | 0.945" (24.00mm) | 1.299" (33.00mm) | M40x1.5 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP66/IP67/IP69 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 100°C | |
|
|
50.632 ES/EMVPERFECT EMC-CABLE GLAND M32 STAI |
2,313 |
|
Datasheet | Cable Gland | 0.551" (14.00mm) | 0.787" (20.00mm) | M32x1.5 | 0.315" (8.00mm) | - | - | Stainless Steel | - | Silver | IP68/IP69K - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
K258-1012-00WADI HEAT EMC-CABLE GLAND M12 ST |
2,862 |
|
Datasheet | Cable Gland | 0.118" (3.00mm) | 0.315" (8.00mm) | M12x1.5 | 0.256" (6.50mm) | - | - | Stainless Steel | - | Silver | IP66/IP67/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 200°C | |
|
|
50.663 PA7035FK1CABLE GLAND M63 WITH INSERT FOR |
4,652 |
|
Datasheet | Cable Gland | 0.591" (15.00mm) | 1.772" (45.00mm) | M63x1.5 | 0.472" (12.00mm) | - | - | Polyamide (PA6), Nylon 6 | - | Gray | IP66 - Dust Tight, Water Resistant | -40°C ~ 100°C | |
|
|
50.663 PA7001FK1CABLE GLAND M63 WITH INSERT FOR |
4,471 |
|
Datasheet | Cable Gland | 0.591" (15.00mm) | 1.772" (45.00mm) | M63x1.5 | 0.472" (12.00mm) | - | - | Polyamide (PA6), Nylon 6 | - | Gray | IP66 - Dust Tight, Water Resistant | -40°C ~ 100°C | |
|
50.640 M/EMVDLCABLE GLAND 19-27MM M40 BRASS |
3,965 |
|
Datasheet | Cable Gland | 0.748" (19.00mm) | 1.063" (27.00mm) | M40x1.5 | 0.512" (13.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
101011M16ESWADI CABLE GLAND METRIC - STAINL |
2,445 |
|
Datasheet | Cable Gland | 0.276" (7.00mm) | 0.453" (11.50mm) | M16x1.5 | 0.236" (6.00mm) | - | - | Stainless Steel | - | Silver | IP65 - Dust Tight, Water Resistant | -30°C ~ 100°C | |
|
19.536M50CABLE GLND 26.5-32.5MM M50 BRASS |
1,967 |
|
Datasheet | Cable Gland | 1.043" (26.50mm) | 1.280" (32.50mm) | M50x1.5 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP55 - Dust Protected, Water Resistant | -30°C ~ 100°C | |
|
|
K156-1025-00WADI HEAT EMC-CABLE GLAND M25 NI |
4,855 |
|
Datasheet | Cable Gland | 0.551" (14.00mm) | 0.807" (20.50mm) | M25x1.5 | 0.315" (8.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP66/IP67/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 200°C | |
|
|
K102-1032-00-EXPERFECT PLUS EMC-EX-CABLE GLAND |
4,089 |
|
Datasheet | Cable Gland | 0.433" (11.00mm) | 0.827" (21.00mm) | M32x1.5 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 85°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.