Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
50.048 PA7035CABLE GLAND 34-44MM PG48 |
2,735 |
|
Datasheet | Cable Gland | 1.339" (34.00mm) | 1.732" (44.00mm) | PG48 | 0.551" (14.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
50.650 PA/RSWCABLE GLAND 21-35MM M50 POLYAMID |
1,329 |
|
Datasheet | Cable Gland | 0.827" (21.00mm) | 1.378" (35.00mm) | M50x1.5 | 0.472" (12.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Black | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
21.725MCABLE GLAND RA 8.5-15MM M25 ZINC |
3,503 |
|
Datasheet | Cable Gland - 90° | 0.335" (8.50mm) | 0.591" (15.00mm) | M25x1.5 | 0.650" (16.50mm) | - | - | Zinc, Nickel Plated | Locknut, O-Ring, Seal | Silver | IP55 - Dust Protected, Water Resistant | -20°C ~ 100°C | |
|
50.663 M/EMVDCABLE GLAND 32-42MM M63 BRASS |
3,135 |
|
Datasheet | Cable Gland | 1.260" (32.00mm) | 1.654" (42.00mm) | M63x1.5 | 0.394" (10.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
50.650 ESCABLE GLAND 24-35MM M50 S STEEL |
4,272 |
|
Datasheet | Cable Gland | 0.945" (24.00mm) | 1.378" (35.00mm) | M50x1.5 | 0.354" (9.00mm) | - | - | Stainless Steel | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
112 MGGTWISTING SLEEVE CLOSED M12 |
200 |
|
Datasheet | Cable Grip | 0.138" (3.50mm) | 0.236" (6.00mm) | M12x1.5 | 0.315" (8.00mm) | - | - | Polyethylene (PE) | - | Gray | IP54 - Dust Protected, Water Resistant | -30°C ~ 90°C | |
|
|
116 MGGTWISTING SLEEVE CLOSED M16 |
200 |
|
Datasheet | Cable Grip | 0.197" (5.00mm) | 0.335" (8.50mm) | M16x1.5 | 0.315" (8.00mm) | - | - | Polyethylene (PE) | - | Gray | IP54 - Dust Protected, Water Resistant | -30°C ~ 90°C | |
|
|
111 GTWISTING SLEEVE WITH HOLE PG 11 |
200 |
|
Datasheet | Cable Grip | 0.276" (7.00mm) | 0.394" (10.00mm) | PG11 | 0.350" (8.89mm) | - | - | Polyethylene (PE) | - | Gray | IP54 - Dust Protected, Water Resistant | -30°C ~ 90°C | |
|
|
111 GGTWISTING SLEEVE CLOSED PG 11 |
200 |
|
Datasheet | Cable Grip | 0.276" (7.00mm) | 0.394" (10.00mm) | PG11 | 0.350" (8.89mm) | - | - | Polyethylene (PE) | - | Gray | IP54 - Dust Protected, Water Resistant | -30°C ~ 90°C | |
|
|
109 GTWISTING SLEEVE WITH HOLE PG 9 |
200 |
|
Datasheet | Cable Grip | 0.236" (6.00mm) | 0.315" (8.00mm) | PG9 | 0.319" (8.10mm) | - | - | Polyethylene (PE) | - | Gray | IP54 - Dust Protected, Water Resistant | -30°C ~ 90°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.