Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
K150-1016-00CABLE GLAND 5-10.5MM M16 BRASS |
1,186 |
|
Datasheet | Cable Gland | 0.197" (5.00mm) | 0.413" (10.50mm) | M16x1.5 | 0.276" (7.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
50.640 PA7035CABLE GLAND 19-28MM M40 POLYAMID |
1,393 |
|
Datasheet | Cable Gland | 0.748" (19.00mm) | 1.102" (28.00mm) | M40x1.5 | 0.394" (10.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
K151-1012-00CABLE GLAND 3-8MM M12 BRASS |
4,736 |
|
Datasheet | Cable Gland | 0.118" (3.00mm) | 0.315" (8.00mm) | M12x1.5 | 0.256" (6.50mm) | - | - | Brass, Nickel Plated | Contact Spring, O-Ring, Seal | Silver | IP66/IP68/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
50.640 PA/RSWCABLE GLAND 16-28MM M40 POLYAMID |
1,937 |
|
Datasheet | Cable Gland | 0.630" (16.00mm) | 1.102" (28.00mm) | M40x1.5 | 0.394" (10.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Black | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
50.021CABLE GLND 13-18.01MM PG21 BRASS |
3,966 |
|
Datasheet | Cable Gland | 0.512" (13.00mm) | 0.709" (18.01mm) | PG21 | 0.276" (7.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
50.616 Y/EMVCABLE GLAND 5-9.5MM M16 BRASS |
4,907 |
|
Datasheet | Cable Gland | 0.197" (5.00mm) | 0.374" (9.50mm) | M16x1.5 | 0.394" (10.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
21.616MCABLE GLAND RA M16 ZINC |
4,550 |
|
Datasheet | Cable Gland - 90° | - | - | M16x1.5 | 0.630" (16.00mm) | - | 0.480" (12.2mm) | Zinc, Nickel Plated | Locknut, O-Ring | Silver | IP68 - Dust Tight, Waterproof | -20°C ~ 100°C | |
|
50.134/EMV/RCABLE GLND 8-16MM 3/4" NPT BRASS |
3,526 |
|
Datasheet | Cable Gland | 0.315" (8.00mm) | 0.630" (16.00mm) | 3/4" NPT | 0.433" (11.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
50.048 PA/SWCABLE GLAND 34-44MM PG48 |
3,975 |
|
Datasheet | Cable Gland | 1.339" (34.00mm) | 1.732" (44.00mm) | PG48 | 0.551" (14.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Black | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
50.632 M-LCABLE GLAND 14-20MM M32 BRASS |
1,503 |
|
Datasheet | Cable Gland | 0.551" (14.00mm) | 0.787" (20.00mm) | M32x1.5 | 0.512" (13.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.