Stepper Motors
Review Stepper Motors Motors, Actuators, Solenoids and Drivers components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Type | Coil Type | Voltage - Rated | Current Rating (Amps) | Steps per Revolution | Step Angle | Accuracy | Torque - Holding (oz-in / mNm) | Size / Dimension | NEMA Frame Size | Diameter - Shaft | Length - Shaft and Bearing | Mounting Hole Spacing | Termination Style | Operating Temperature | Coil Resistance | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
80910502MOTOR DC LINEAR .033 MM-STEP 4 P |
1,038 |
|
Datasheet | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
82924028STEPPER MOTOR PM GEARED 12.9V |
3,262 |
|
Datasheet | 82924 | Bulk | Active | Permanent Magnet Gear Motor | Unipolar | 12.9VDC | - | 480.0 | 0.117° | - | 8.1 / 57 | Round - 2.020" Dia (51.30mm) | - | 0.079" (2.00mm) | 0.354" (9.00mm) | 2.630" (66.68mm) | Wire Leads | - | - | Flatted Shaft |
|
|
82914016MOTOR 829100 - 7 5 48STEP/T GEAR |
2,877 |
|
Datasheet | 82914 | Tray | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
82924031STEPPER MOTOR PM GEARED UNI 6.3V |
1,251 |
|
Datasheet | 82924 | Tray | Active | Permanent Magnet Gear Motor | Unipolar | 6.3VDC | 590 mA | 48.0 | 7.5° | ±5% | 9.91 / 70 | Round - 2.020" Dia (51.30mm) | 21 | 0.157" (4.00mm) | 0.520" (13.20mm) | 1.874" (47.60mm) | Wire Leads | -30°C ~ 70°C | 10.7 Ohms | Flatted Shaft |
|
|
82924027STEPPER MOTOR PM GEARED UNI 6.3V |
3,053 |
|
Datasheet | 82924 | Tray | Active | Permanent Magnet Gear Motor | Unipolar | 6.3VDC | 590 mA | 48.0 | 7.5° | ±5% | 9.91 / 70 | Round - 2.020" Dia (51.30mm) | 21 | 0.157" (4.00mm) | 0.520" (13.20mm) | 1.874" (47.60mm) | Wire Leads | -30°C ~ 70°C | 10.7 Ohms | Flatted Shaft |
|
|
82929001MOTOR 829200 - 7 5 48STEP/T GEAR |
2,350 |
|
Datasheet | 82929 | Tray | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
82910502STEPPER MOTOR PM UNIPOLAR 17V |
1,922 |
|
Datasheet | 82910 | Bulk | Active | Permanent Magnet | Unipolar | 17VDC | 140 mA | 24.0 | 15° | - | 2.1 / 15 | Round - 1.409" Dia (35.80mm) | - | 0.079" (2.00mm) | 0.354" (9.00mm) | 1.650" (42.00mm) | Wire Leads | - | 115 Ohms | Round Shaft |
|
|
82910001STEPPER MOTOR PM BIPOLAR 4.7V |
2,530 |
|
Datasheet | 82910 | Bulk | Active | Permanent Magnet | Bipolar | 4.7VDC | 520 mA | 48.0 | 7.5° | ±5% | 3.5 / 25 | Round - 1.409" Dia (35.80mm) | - | 0.079" (2.00mm) | 0.354" (9.00mm) | 1.650" (42.00mm) | Wire Leads | - | 9 Ohms | - |
|
|
82910002STEPPER MOTOR 4PH 15.5OHM PAL 9A |
1,885 |
|
Datasheet | 82910 | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
82910003STEPPER MOTOR PM UNIPOLAR 12.7V |
4,837 |
|
Datasheet | 82910 | Bulk | Active | Permanent Magnet | Unipolar | 12.7VDC | 190 mA | 48.0 | 7.5° | ±5% | 2.83 / 20 | Round - 1.409" Dia (35.80mm) | - | 0.079" (2.00mm) | 0.354" (9.00mm) | 1.378" (35.00mm) | Wire Leads | - | 66 Ohms | Round Shaft |
Frequently Asked Questions
What are Stepper Motors components used for?
Stepper Motors components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Stepper Motors part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Stepper Motors parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.