End Effectors
Review End Effectors Robotics components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Type | Number of Jaws | Drive Type | Stroke Per Jaw | Operating Pressure | Closing Force | Opening Force | Features | Operating Temperature | Ingress Protection |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HGPT-25-A-B-F-G1PARALLEL GRIPPER |
2,253 |
|
Datasheet | HGPT | Bulk | Active | Parallel Gripper | 2 | Pneumatic | 3mm | 58.0 ~ 116.0PSI (4 ~ 8 bar) | - | - | - | 5°C ~ 60°C | IP40 |
|
|
HGPT-25-A-B-G1PARALLEL GRIPPER |
3,901 |
|
Datasheet | HGPT | Bulk | Active | Parallel Gripper | 2 | Pneumatic | 6mm | 58.0 ~ 116.0PSI (4 ~ 8 bar) | - | - | - | 5°C ~ 60°C | IP40 |
|
|
HGP-25-A-B-SSKPARALLEL GRIPPER |
2,031 |
|
Datasheet | HGP | Bulk | Obsolete | Parallel Gripper | 2 | Pneumatic | 7.5mm | 29.0 ~ 116.0PSI (2 ~ 8 bar) | 34.67kgf | 37.73kgf | - | 5°C ~ 60°C | IP54 - Dust Protected, Water Resistant |
|
|
HGPT-35-A-BPARALLEL GRIPPER |
1,916 |
|
Datasheet | HGPT | Bulk | Active | Parallel Gripper | 2 | Pneumatic | 8mm | 43.5 ~ 116.0PSI (3 ~ 8 bar) | 46.70kgf | 49.97kgf | - | 5°C ~ 60°C | IP40 |
|
|
HGPT-35-A-B-FPARALLEL GRIPPER |
0 |
|
Datasheet | HGPT | Bulk | Active | Parallel Gripper | 2 | Pneumatic | 4mm | 43.5 ~ 116.0PSI (3 ~ 8 bar) | 95.24kgf | 101.97kgf | - | 5°C ~ 60°C | IP40 |
|
|
DHDS-32-A-NCTHREE-POINT GRIPPER |
1,681 |
|
Datasheet | DHDS | Bulk | Active | Parallel Gripper | 3 | Pneumatic | 3.9mm | 58.0 ~ 116.0PSI (4 ~ 8 bar) | - | - | - | 5°C ~ 60°C | - |
|
|
DHPL-40-100-P-APARALLEL GRIPPER |
3,950 |
|
Datasheet | DHPL | Bulk | Active | Parallel Gripper | 2 | Pneumatic | 50mm | 21.8 ~ 116.0PSI (1.5 ~ 8 bar) | 94.22kgf | 112.17kgf | - | -10°C ~ 60°C | IP54 - Dust Protected, Water Resistant |
|
|
DHRS-32-A-NCRADIAL GRIPPER |
3,681 |
|
Datasheet | DHRS | Bulk | Active | Angular Gripper | 2 | Pneumatic | - | 58.0 ~ 116.0PSI (4 ~ 8 bar) | - | - | - | 5°C ~ 60°C | - |
|
|
DHPS-35-APARALLEL GRIPPER |
4,287 |
|
Datasheet | DHPS | Bulk | Active | Parallel Gripper | 2 | Pneumatic | 12.5mm | 29.0 ~ 116.0PSI (2 ~ 8 bar) | 92.79kgf | 98.91kgf | - | 5°C ~ 60°C | - |
|
|
DHPL-40-200-P-APARALLEL GRIPPER |
1,391 |
|
Datasheet | DHPL | Bulk | Active | Parallel Gripper | 2 | Pneumatic | 100mm | 21.8 ~ 116.0PSI (1.5 ~ 8 bar) | 101.16kgf | 120.33kgf | - | -10°C ~ 60°C | IP54 - Dust Protected, Water Resistant |
Frequently Asked Questions
What are End Effectors components used for?
End Effectors components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right End Effectors part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find End Effectors parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.