Preparation-Treatment
Review Preparation-Treatment Industrial Automation and Controls components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Type | Operating Pressure | Pressure Regulation | Flow Rate | Features | Connection Method | Filtration Level | Fluid Type | Operating Temperature | Flow Direction | Drain Type | Condensation Capacity | Oil Capacity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VPPX-8L-L-1-G14-0L10H-S1PROPORTIONAL-PRESSURE REGULATOR |
2,805 |
|
Datasheet | VPPX | Bulk | Active | Regulator | - | 0 ~ 145 PSI (0 ~ 10 bar) | 726GPM (2750LPM) | 21.6 ~ 26.4VDC Supply Voltage | G1/4 | - | Compressed Air, Inert Gas | 0°C ~ 60°C | - | - | - | - |
|
|
VPPX-8F-L-1-F-0L10H-S1PROPORTIONAL-PRESSURE REGULATOR |
3,310 |
|
Datasheet | VPPX | Bulk | Active | Regulator | - | 0 ~ 145 PSI (0 ~ 10 bar) | 436GPM (1650LPM) | 21.6 ~ 26.4VDC Supply Voltage | - | - | Compressed Air, Inert Gas | 0°C ~ 60°C | - | - | - | - |
|
|
LFR-1/2-D-DI-MAXI-KGSERVICE UNIT |
3,134 |
|
Datasheet | D | Bulk | Active | Filter Regulator | 43.5 ~ 232.1 PSI (3 ~ 16 bar) | 36 ~ 174 PSI (2.5 ~ 12 bar) | - | - | G1/2 | 40µm | Compressed Air, Inert Gas | -10°C ~ 60°C | - | Manual | 1.45oz (43ml) | - |
|
|
LFR-3/4-D-DI-MAXI-KGSERVICE UNIT |
4,740 |
|
Datasheet | D | Bulk | Active | Filter Regulator | 43.5 ~ 232.1 PSI (3 ~ 16 bar) | 36 ~ 174 PSI (2.5 ~ 12 bar) | 793GPM (3000LPM) | - | G3/4 | 40µm | Compressed Air, Inert Gas | -10°C ~ 60°C | - | Manual | 1.45oz (43ml) | - |
|
|
MS6-LDM1-1/2-P20MEMBRANE AIR DRYER |
1,299 |
|
Datasheet | MS | Bulk | Active | Lubricator | 43.5 ~ 181.3 PSI (3 ~ 12.5 bar) | - | 53GPM (200LPM) | - | G1/2 | - | Compressed Air | 2°C ~ 50°C | - | - | - | - |
|
|
MS6-LDM1-1/4-P20MEMBRANE AIR DRYER |
3,274 |
|
Datasheet | MS | Bulk | Active | Lubricator | 43.5 ~ 181.3 PSI (3 ~ 12.5 bar) | - | 53GPM (200LPM) | - | G1/4 | - | Compressed Air | 2°C ~ 50°C | - | - | - | - |
|
|
MS6N-LDM1-3/8-P20MEMBRANE AIR DRYER |
3,475 |
|
Datasheet | MS | Bulk | Active | Lubricator | 43.5 ~ 181.3 PSI (3 ~ 12.5 bar) | - | 53GPM (200LPM) | - | NPT3/8 | - | Compressed Air | 2°C ~ 50°C | - | - | - | - |
|
|
MS6N-LDM1-1/2-P20MEMBRANE AIR DRYER |
2,554 |
|
Datasheet | MS | Bulk | Active | Lubricator | 43.5 ~ 181.3 PSI (3 ~ 12.5 bar) | - | 53GPM (200LPM) | - | NPT1/2 | - | Compressed Air | 2°C ~ 50°C | - | - | - | - |
|
|
MS6N-LDM1-1/4-P20-ZMEMBRANE AIR DRYER |
1,346 |
|
Datasheet | MS | Bulk | Active | Lubricator | 43.5 ~ 181.3 PSI (3 ~ 12.5 bar) | - | 53GPM (200LPM) | - | NPT1/4 | - | Compressed Air | 2°C ~ 50°C | - | - | - | - |
|
|
MS6N-LDM1-1/2-P20-ZMEMBRANE AIR DRYER |
2,068 |
|
Datasheet | MS | Bulk | Active | Lubricator | 43.5 ~ 181.3 PSI (3 ~ 12.5 bar) | - | 53GPM (200LPM) | - | NPT1/2 | - | Compressed Air | 2°C ~ 50°C | - | - | - | - |
Frequently Asked Questions
What are Preparation-Treatment components used for?
Preparation-Treatment components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Preparation-Treatment part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Preparation-Treatment parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.