Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TS31023-QFNRIC PWR SWITCH P-CHAN 1:1 8DFN |
3,024 |
|
Datasheet | 8-VFDFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 5V ~ 16V | Not Required | 60mA | - | Non-Inverting | - | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 8-DFN (2x2) |
|
TS13001-QFNRIC PWR SWITCH 1:1 20QFN |
2,710 |
|
Datasheet | 20-VFQFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | AC Switch | 1 | 1:1 | - | - | Clock | 24 VAC | Not Required | 4A | 105mOhm | - | - | Current Limiting (Fixed) | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 20-QFN (4x4) |
|
TS13103-QFNRIC PWR SWITCH 1:1 16MLPQ |
3,984 |
|
Datasheet | 16-VFQFN Exposed Pad | - | Tray | Obsolete | AC Switch | 1 | 1:1 | - | - | Clock | 60V (Max) | 4V ~ 5.5V | 2.5A | 290mOhm | - | - | Current Limiting | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 16-MLPQ (3x3) |
|
|
TS13011-QFNRNON-LATCHING GALVANIC ISOLATED S |
1,972 |
|
Datasheet | - | - | Tray | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
TS13401ULTRTIC PWR DRIVER P-CHAN 1:1 20MLPQ |
1,197 |
|
Datasheet | 20-VFQFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | Low Side | P-Channel | 1-Wire | - | 4.5V ~ 5.5V | - | - | - | - | Over Current, Over Temperature | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 20-MLPQ-UT (3x3) |
|
SC704CSTRTIC PWR SWITCH N-CHAN 1:1 4CSP |
4,352 |
|
Datasheet | 4-WFBGA, CSPBGA | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 1.1V ~ 3.6V | Not Required | 500mA | 64mOhm | - | Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-CSP (0.76x0.76) |
|
|
SC724CSTRTIC PWR SWITCH N-CHAN 1:1 4CSP |
4,483 |
|
Datasheet | 4-WFBGA, CSPBGA | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 1.1V ~ 3.6V | Not Required | 2A | 24mOhm | - | Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-CSP (0.76x0.76) |
|
|
SC728CSTRTIC PWR SWITCH N-CHAN 1:1 4CSP |
4,359 |
|
Datasheet | 4-WFBGA, CSPBGA | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 1.1V ~ 3.6V | Not Required | 2A | 24mOhm | - | Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-CSP (0.76x0.76) |
|
|
SC729CSTRTIC PWR SWITCH N-CHAN 1:1 4CSP |
3,344 |
|
Datasheet | 4-WFBGA, CSPBGA | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 1.1V ~ 3.6V | Not Required | 2A | 24mOhm | - | Load Discharge, Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-CSP (0.76x0.76) |
|
|
SC33021CSTRTIC PWR LOAD SWITCH 2A REV 4CSP |
4,412 |
|
Datasheet | - | - | Tape & Reel (TR) | Obsolete | General Purpose | - | - | - | - | - | 1.65V ~ 5.5V | - | 2A | 32mOhm | - | Load Discharge | Reverse Current | - | - | - | Surface Mount | 4-CSP (0.90x0.90) |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.