Microphones
Review Microphones Audio Products components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Type | Output Type | Direction | Frequency Range | Sensitivity | S/N Ratio | Impedance | Voltage - Rated | Voltage Range | Current - Supply | Port Location | Ratings | Termination | Size / Dimension | Height (Max) | Shape | Grade | Qualification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TO-30047-D60MIC COND MATCH ANALOG OMNI |
2,834 |
|
Datasheet | TO | Tray | Active | Electret Condenser, Matched Set | Analog | Omnidirectional | 200 Hz ~ 1 kHz | -56.5dB ±3dB @ 74dB SPL | - | 4.4 kOhms | 1.3 V | - | 50 µA | Side | - | - | - | - | - | - | - |
|
|
FB-FO-25383-000MIC BOOM 0.340"DIA |
4,562 |
|
Datasheet | FB-FO | Bulk | Active | Boom | - | - | - | - | - | - | - | - | - | - | - | Wire Leads | 0.340" Dia (8.64mm) | - | Circular | - | - |
|
VEK-H-30108-000MIC COND ANLG -72DB 0.500"DIA |
2,148 |
|
Datasheet | VEK-H | Bulk | Active | Electret Condenser | Analog | - | 100 Hz ~ 10 kHz | -72dB ±3dB @ 74dB SPL | - | - | 9 V | 9 V ~ 10 V | - | Top | - | Wire Leads | 0.500" Dia (12.70mm) | - | Circular | - | - |
|
|
FB-BU-34023-000BOOM MICROPHONE |
3,150 |
|
Datasheet | - | Bulk | Active | Boom | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
FB-DL-32509-000BOOM MICROPHONE |
1,314 |
|
Datasheet | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
SPV1840LR5H-BMIC MEMS ANALOG OMNI -38DB |
486,363 |
|
Datasheet | SiSonic™, Zero-Height Mic™, SPV | Tape & Reel (TR) | Obsolete | MEMS (Silicon) | Analog | Omnidirectional | 100 Hz ~ 10 kHz | -38dB ±3dB @ 94dB SPL | 62.5dB | 400 Ohms | - | 1.5 V ~ 3.6 V | 60 µA | Bottom | - | Solder Pads | 0.108" L x 0.073" W (2.75mm x 1.85mm) | 0.039" (0.98mm) | Rectangular | - | - |
|
SPH1611LR5H-1MIC MEMS ANALOG OMNI -38DB |
1,368 |
|
Datasheet | SiSonic™, Zero-Height Mic™, SPH | Tape & Reel (TR) | Obsolete | MEMS (Silicon) | Analog | Omnidirectional | 100 Hz ~ 10 kHz | -38dB ±1dB @ 94dB SPL | 65dB | 400 Ohms | - | 1.5 V ~ 3.6 V | 185 µA | Bottom | - | Solder Pads | 0.138" L x 0.104" W (3.50mm x 2.65mm) | 0.043" (1.10mm) | Rectangular | - | - |
|
SPH0611LR5H-1MIC MEMS ANALOG OMNI -38DB |
68,784 |
|
Datasheet | SiSonic™ | Tape & Reel (TR) | Obsolete | MEMS (Silicon) | Analog | Omnidirectional | 100 Hz ~ 10 kHz | -38dB ±1dB @ 94dB SPL | 65dB | 400 Ohms | - | 1.5 V ~ 3.6 V | 185 µA | Bottom | - | Solder Pads | 0.138" L x 0.104" W (3.50mm x 2.65mm) | 0.043" (1.10mm) | Rectangular | - | - |
|
SPQ0410HE5H-PB-7MIC MEMS ANALOG OMNI -42DB |
4,648 |
|
Datasheet | SiSonic™ | Tape & Reel (TR) | Obsolete | MEMS (Silicon) | Analog | Omnidirectional | 100 Hz ~ 10 kHz | -42dB ±3dB @ 94dB SPL | 59dB | 400 Ohms | - | 1.5 V ~ 3.6 V | 250 µA | Top | - | Solder Pads | 0.148" L x 0.088" W (3.76mm x 2.24mm) | 0.047" (1.20mm) | Rectangular | - | - |
|
|
EK-23132-C36MIC COND ANALOG OMNI -53DB |
447 |
|
Datasheet | EK | Bulk | Obsolete | Electret Condenser | Analog | Omnidirectional | 100 Hz ~ 10 kHz | -53dB ±2dB @ 74dB SPL | - | 4.4 kOhms | 1.3 V | - | 50 µA | Top | - | Solder Pads | 0.219" L x 0.157" W (5.56mm x 3.99mm) | 0.089" (2.26mm) | Rectangular | - | - |
Frequently Asked Questions
What are Microphones components used for?
Microphones components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Microphones part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Microphones parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.