Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
RC4580IPWR-JPROTOTYPE |
4,973 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | Audio | 2 | Push-Pull | 5V/µs | 12 MHz | - | 100 nA | 500 µV | 6mA | 50 mA | 4 V | 32 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
|
LM124AQDRDLPROTOTYPE |
4,177 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Push-Pull | 0.5V/µs | 1.2 MHz | - | 50 nA | - | 1.4mA | 30 mA | 3 V | 32 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
THS4031MJG100-MHZ LOW-NOISE HIGH-SPEED AMP |
4,967 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 1 | Push-Pull | 100V/µs | 120 MHz | 100 MHz | 3 µA | 500 µV | 8.5mA | 90 mA | 9 V | 32 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
LM6132BIMX/SL110236PROTOTYPE |
3,303 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x2 Channels) | 4 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LMC6482AIMX/E7001821PROTOTYPE |
4,614 |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
THS4011MFKB290-MHZ LOW-DISTORTION VOLTAGE-F |
4,163 |
|
Datasheet | - | 20-CLCC | Tube | Active | Voltage Feedback | 1 | Push-Pull | 400V/µs | 200 MHz | 270 MHz | 2 µA | 1 mV | 7.8mA | 115 mA | 9 V | 32 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
LM2902M/ELLI821PROTOTYPE |
1,972 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Push-Pull | 0.5V/µs | 1 MHz | - | 45 nA | 2 mV | 1.5mA | 40 mA | 3 V | 26 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
|
TLE2142IDRSVPROTOTYPE |
4,371 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Push-Pull, Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA | 50 mA | 4 V | 44 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LM124AWGRQMLVSPACE-GRADE, QUAD, 32-V, 1-MHZ, |
2,940 |
|
Datasheet | - | 14-CSOIC (0.250", 6.35mm Width) | Tray | Active | General Purpose | 4 | Push-Pull | 0.1V/µs | 1 MHz | - | 100 pA | - | 1.5mA | 20 mA | 3 V | 32 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-CFP |
|
LM124AJRLQMLVSPACE-GRADE, QUAD, 32-V, 1-MHZ, |
4,588 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Push-Pull | 0.1V/µs | 1 MHz | - | 10 nA | - | 1.5mA | 20 mA | 3 V | 32 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.