Limit Switches
Review Limit Switches Switches components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Circuit | Switch Function | Current Rating (Amps) | Voltage Rating - AC | Voltage Rating - DC | Actuator Type | Mounting Type | Termination Style | Ingress Protection | Features | Operating Force | Release Force | Operating Position | Pretravel | Differential Travel | Overtravel | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
1SE1-3SWITCH SNAP ACTION SPDT 5A 250V |
392 |
|
Datasheet | SE | Bulk | Active | SPDT | On-Mom | 5A (AC/DC) | 250 V | 30 V | Round (Pin Plunger) | Chassis Mount | Wire Leads | Waterproof | - | 141 ~ 482gf | 113gf | 0.425" (10.8mm) | 0.050" (1.27mm) | 0.004" (0.1mm) | 0.003" (0.076mm) | -54°C ~ 105°C |
|
DT-2R-A7SWITCH SNAP ACTION DPDT 10A 125V |
576 |
|
Datasheet | DT | Bulk | Active | DPDT | On-Mom | 10A (AC), 300mA (DC) | 125 V | 125 V | Round (Pin Plunger) | Chassis Mount | Screw Terminal | - | - | 340 ~ 567gf | 57gf | 0.615" (15.6mm) | 0.075" (1.9mm) | 0.060" (1.5mm) | 0.005" (0.13mm) | -55°C ~ 85°C |
|
DTE6-2RN2SWITCH SNAP ACTION DPDT 10A 125V |
367 |
|
Datasheet | E6 | Bulk | Active | DPDT | On-Mom | 10A (AC), 300mA (DC) | 125 V | 125 V | Lever, Roller | Chassis Mount | Screw Terminal | IP54 - Dust Protected, Water Resistant | Actuator Seal Boot | - | 170gf | - | 0.266" (6.75mm) | 0.165" (4.2mm) | 0.219" (5.6mm) | -32°C ~ 71°C |
|
2AC6SWITCH SNAP ACTION SPDT 15A 125V |
109 |
|
Datasheet | AC | Bulk | Active | SPDT | On-Mom | 15A (AC), 500mA (DC) | 125 V | 125 V | Push-Pull Plunger | Chassis Mount | Screw Terminal | - | - | 1814gf | - | 0.203" (5.2mm) | - | - | 0.125" (3.2mm) | -18°C ~ 149°C |
|
LSA1ASWITCH SNAP ACTION SPDT 10A 120V |
2,561 |
|
Datasheet | HDLS | Bulk | Active | SPDT (DB/DM) | On-Mom | 10A (AC), 800mA (DC) | 120 V | 115 V | Side Rotary - No Lever | Chassis Mount | Plug In | - | - | 46gfm | - | - | 15° | 5° | 60° | -12°C ~ 121°C |
|
DT-2RV23-A7SWITCH SNAP ACTION DPDT 10A 125V |
167 |
|
Datasheet | DT | Bulk | Active | DPDT | On-Mom | 10A (AC), 300mA (DC) | 125 V | 125 V | Lever, Roller | Chassis Mount | Screw Terminal | - | - | 156 ~ 269gf | 21gf | 1.156" (29.4mm) | 0.195" (4.95mm) | 0.135" (3.4mm) | 0.010" (0.25mm) | -55°C ~ 85°C |
|
914CE2-AGQSWITCH SNAP ACTION SPDT 1A 125V |
1,277 |
|
Datasheet | 914CE | Bulk | Active | SPDT | On-Mom | 1A (AC/DC) | 125 V | 30 V | Roller Plunger | Chassis Mount | Connector | IP66 - Dust Tight, Water Resistant | - | 1200gf | 450gf | 1.122" (28.5mm) | 0.071" (1.8mm) | 0.004" (0.1mm) | 0.118" (3.0mm) | 0°C ~ 105°C |
|
SZL-WL-K-NSWITCH SNAP ACTION SPDT 10A 125V |
4,854 |
|
Datasheet | SZL-WL | Bulk | Active | SPDT (DB/DM) | On-Mom | 10A (AC), 6A (DC) | 125 V | 30 V | Spring, Coil | Chassis Mount | Screw Terminal | IP67 - Dust Tight, Waterproof | - | 150gf | - | 0.787" (20.0mm) | 0.787" (20.0mm) | - | - | -10°C ~ 80°C |
|
21EN9-6SWITCH SNAP ACTION SPDTX2 4A 28V |
1,034 |
|
Datasheet | EN | Bulk | Active | SPDT x 2 | On-Mom | 4A (DC) | - | 28 V | Roller Plunger | Panel Mount | Wire Leads | - | Cable Length 6', Sealed | 2722 ~ 5443gf | 1814gf | - | 0.040" (1.0mm) | 0.020" (0.5mm) | 0.250" (6.35mm) | -54°C ~ 85°C |
|
ZX40E10E01SWITCH SNAP ACTION SPDT 3A 125V |
3,679 |
|
Datasheet | ZX | Bulk | Active | SPDT | On-Mom | 3A (AC) | 125 V | - | Lever, Simulated Roller | Chassis Mount | Solder Lug | - | - | 55gf | 8.000gf | 0.437" (11.1mm) | 0.150" (3.8mm) | 0.050" (1.3mm) | 0.025" (0.6mm) | -40°C ~ 85°C |
Frequently Asked Questions
What are Limit Switches components used for?
Limit Switches components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Limit Switches part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Limit Switches parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.