Heat Shrink Boots, Caps
Review Heat Shrink Boots, Caps Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Type | Shell Size - Insert | Features | Color | Material | Large Diameter Supplied | Large Diameter Recovered | Small Diameter Supplied | Small Diameter Recovered | Large Recovered Length | Small Recovered Length | Total Length Supplied | Total Length Recovered |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
214A011-3-00-0HEATSHRINK BOOT RECT SZ11 BLACK |
2,716 |
|
Datasheet | Thermofit 214A0 | Bulk | Active | Boot, Rectangular | 11 | - | Black | Polyolefin (PO), Semi-Rigid | 0.850" (21.59mm) | 0.800" (20.32mm) | 0.311" (7.90mm) | 0.161" (4.09mm) | 0.752" (19.10mm) | - | - | 1.311" (33.30mm) |
|
|
223W102-25/225-0HEATSHRINK BOOT 90DEGREE SZ2 BLK |
4,764 |
|
Datasheet | Thermofit 223W1 | Bulk | Active | Boot - 90° | 2 | Abrasion Resistant, Adhesive Coating, Chemical Resistant, Eyelet and Clip, Flame Retardant, Fluid Resistant, Heat Resist, Lip | Black | Elastomer, Semi-Rigid, Irradiated | 0.945" (24.00mm) | 0.591" (15.00mm) | 0.945" (24.00mm) | 0.197" (5.00mm) | 1.417" (35.99mm) | 0.433" (11.00mm) | - | 1.378" (35.00mm) |
|
|
234A911-4-0HEATSHRINK BOOT RECT RA SZ11 BLK |
2,671 |
|
Datasheet | Thermofit 234A9 | Bulk | Active | Boot, Rectangular - Right Angle, 90° | 11 | - | Black | Polyolefin (PO), Flexible | 0.830" (21.08mm) | 0.800" (20.32mm) | 0.490" (12.45mm) | 0.420" (10.67mm) | - | - | - | - |
|
|
234A611-3/42-0HEATSHRINK BOOT RECT RA SZ11 BLK |
2,065 |
|
Datasheet | Thermofit 234A6 | Bulk | Active | Boot, Rectangular - Right Angle, 90° | 11 | - | Black | Polyolefin (PO), Semi-Rigid | 0.800" (20.32mm) | 0.630" (16.00mm) | 0.630" (16.00mm) | 0.160" (4.06mm) | - | - | - | - |
|
|
202D121-4-07-0HEATSHRINK BOOT BLACK |
1,313 |
|
Datasheet | Thermofit 202D1 | Bulk | Active | Boot | - | - | Black | Polyolefin (PO), Flexible | 0.920" (23.37mm) | 0.410" (10.41mm) | 0.917" (23.29mm) | 0.220" (5.59mm) | 0.360" (9.14mm) | 0.400" (10.16mm) | - | 1.030" (26.16mm) |
|
|
CP4995-000HEATSHRINK BOOT 90DEGREE RED |
3,368 |
|
Datasheet | - | Bulk | Active | Boot - 90° | - | - | Red | Polyolefin (PO), Flexible | 1.118" (28.40mm) | 0.022" (0.56mm) | 0.043" (1.09mm) | 0.010" (0.25mm) | 0.043" (1.09mm) | 0.028" (0.71mm) | - | - |
|
|
CS0843-000HEATSHRINK BOOT SZ11 |
3,903 |
|
Datasheet | - | Bulk | Active | Boot | 11 | - | - | Polyolefin (PO), Semi-Rigid | 0.380" (9.65mm) | 0.310" (7.87mm) | 0.380" (9.65mm) | 0.080" (2.03mm) | 0.580" (14.73mm) | - | - | 1.120" (28.45mm) |
|
|
208A021-3-00-0HEATSHRINK BOOT SZ21 BLACK |
4,412 |
|
Datasheet | Thermofit 208A0 | Bulk | Active | Boot | 21 | - | Black | Polyolefin (PO), Semi-Rigid | 0.540" (13.72mm) | 0.410" (10.41mm) | 0.260" (6.60mm) | 0.120" (3.05mm) | 0.840" (21.34mm) | 0.290" (7.37mm) | - | 1.510" (38.35mm) |
|
|
214A511-3/42-0HEATSHRNK BOOT RECTANGULAR SZ11 |
1,352 |
|
Datasheet | Thermofit 214A5 | Bulk | Active | Boot, Rectangular | 11 | - | - | Polyolefin (PO), Semi-Rigid | 0.831" (21.11mm) | 0.799" (20.29mm) | 0.311" (7.90mm) | 0.161" (4.09mm) | 0.752" (19.10mm) | - | - | 1.311" (33.30mm) |
|
|
208A021-3/42-0HEATSHRINK BOOT SZ21 BLACK |
4,523 |
|
Datasheet | Thermofit 208A0 | Bulk | Active | Boot | 21 | - | Black | Polyolefin (PO), Semi-Rigid | 0.540" (13.72mm) | 0.410" (10.41mm) | 0.260" (6.60mm) | 0.120" (3.05mm) | 0.840" (21.34mm) | 0.290" (7.37mm) | - | 1.510" (38.35mm) |
Frequently Asked Questions
What are Heat Shrink Boots, Caps components used for?
Heat Shrink Boots, Caps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Heat Shrink Boots, Caps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Heat Shrink Boots, Caps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.