Heat Shrink Boots, Caps
Review Heat Shrink Boots, Caps Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Type | Shell Size - Insert | Features | Color | Material | Large Diameter Supplied | Large Diameter Recovered | Small Diameter Supplied | Small Diameter Recovered | Large Recovered Length | Small Recovered Length | Total Length Supplied | Total Length Recovered |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CX4639-000FLEX POLY MOLDED PART |
1,809 |
|
Datasheet | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
222D263-4-32-0-CS5460HEATSHRINK BOOT 90DEG SZ63 BLK |
1,947 |
|
Datasheet | Thermofit 222D2 | Bulk | Active | Boot - 90° | 63 | Flame Retardant, Fluid Resistant, Heat Resistant, Lip, Potting (Injection) Port, Vent Port | Black | Polyolefin (PO), Flexible, Irradiated | 1.720" (43.69mm) | 1.340" (34.04mm) | 1.720" (43.69mm) | 0.480" (12.19mm) | 1.079" (27.41mm) | 3.000" (76.20mm) | - | 4.752" (120.70mm) |
|
|
222D232-12-22-0HEATSHRINK BOOT 90DEG SZ32 BLK |
3,005 |
|
Datasheet | Thermofit 222D2 | Bulk | Active | Boot - 90° | 32 | Flame Retardant, Fluid Resistant, Fuel Resistant, Heat Resistant, Lip | Black | Fluoroelastomer (FKM), Flexible, Irradiated | 1.161" (29.49mm) | 0.740" (18.80mm) | 0.720" (18.29mm) | 0.331" (8.41mm) | 0.819" (20.80mm) | 2.240" (56.90mm) | - | 3.500" (88.90mm) |
|
|
CJ6189-000NBC MOLDED PARTS |
4,186 |
|
Datasheet | Thermofit 202G2 | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
382A023-12-0HEATSHRNK BOOT BRKOUT Y SZ23 BLK |
2,917 |
|
Datasheet | Thermofit 382A0 | Bulk | Active | Boot, Transition - Breakout, 2:1 (Y) | 23 | - | Black | Fluoroelastomer (FKM), Flexible | 1.060" (26.92mm) | 0.488" (12.40mm) | 0.520" (13.21mm) | 0.240" (6.10mm) | 1.500" (38.10mm) | 1.700" (43.18mm) | - | - |
|
|
382C303-51-0-CS6944HEATSHRINK BOOT BREAKOUT Y SZ |
3,378 |
|
Datasheet | Thermofit 382C3 | Bulk | Active | Boot, Transition - Breakout, 2:1 (Y) | - | - | - | EPB, Flexible | 2.370" (60.20mm) | 0.791" (20.10mm) | 0.500" (12.70mm), 1.579" (40.11mm) | 0.201" (5.11mm), 0.791" (20.09mm) | 2.500" (63.50mm) | 3.728" (94.69mm) | - | - |
|
|
462A046-3-06/42-0HEATSHRINK BOOT BRKOUT 3:1 SZ46 |
4,815 |
|
Datasheet | Thermofit 462A0 | Bulk | Active | Boot, Transition - Breakout, 3:1 | 46 | - | Black | Polyolefin (PO), Semi-Rigid | 2.190" (55.63mm) | 1.000" (25.40mm) | 1.300" (33.02mm) | 0.490" (12.45mm) | 3.500" (88.90mm) | 4.060" (103.12mm) | - | 7.560" (192.02mm) |
|
|
202K153-12-01-0HEATSHRINK BOOT SZ53 BLACK |
1,254 |
|
Datasheet | Thermofit 202K1 | Bulk | Active | Boot | 53 | Chemical Resistant, Lip | Black | Fluoroelastomer (FKM), Flexible | 1.420" (36.07mm) | 0.882" (22.40mm) | 1.420" (36.07mm) | 0.331" (8.41mm) | 0.870" (22.10mm) | 0.768" (19.51mm) | - | 2.362" (59.99mm) |
|
|
214A032-3S-0HEATSHRINK BOOT RECT SZ32 BLACK |
2,451 |
|
Datasheet | Thermofit 214A0 | Bulk | Obsolete | Boot, Rectangular | 32 | - | Black | Polyolefin (PO), Copper Composite | 1.690" (42.93mm) | 1.661" (42.19mm) | 0.590" (14.99mm) | 0.319" (8.10mm) | 0.980" (24.89mm) | - | - | 1.770" (44.96mm) |
|
|
202B112-3-0HEATSHRINK BOOT SZ12 BLACK |
3,494 |
|
Datasheet | Thermofit 202B1 | Bulk | Active | Boot | 12 | - | Black | Polyolefin (PO), Semi-Rigid | 1.000" (25.40mm) | 0.640" (16.26mm) | 0.760" (19.30mm) | 0.250" (6.35mm) | - | 0.250" (6.35mm) | - | 2.540" (64.52mm) |
Frequently Asked Questions
What are Heat Shrink Boots, Caps components used for?
Heat Shrink Boots, Caps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Heat Shrink Boots, Caps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Heat Shrink Boots, Caps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.