Fixed Inductors
Review Fixed Inductors Inductors, Coils, Chokes components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Material - Core | Inductance | Tolerance | Current Rating (Amps) | Current - Saturation (Isat) | Shielding | DC Resistance (DCR) | Q @ Freq | Frequency - Self Resonant | Ratings | Operating Temperature | Inductance Frequency - Test | Features | Mounting Type | Supplier Device Package | Size / Dimension | Height - Seated (Max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
APC40-102K-RC-TR1000UH 10% AXIAL POWER CHOKES |
3,459 |
|
Datasheet | APC40 | Axial | Tape & Reel (TR) | Active | - | - | 1 mH | ±10% | 1.2 A | 1.8A | - | 570mOhm Max | - | - | - | -55°C ~ 125°C | 25 kHz | - | Through Hole | Axial | 0.550" Dia x 1.000" L (13.97mm x 25.40mm) | - |
|
AE80-102K-RC1000UH 10% PWR COATED INDUCTOR |
4,731 |
|
Datasheet | AE80 | Axial | Bag | Active | - | - | 1 mH | ±10% | 240 mA | - | - | 6.9Ohm Max | 40 @ 250kHz | - | - | -55°C ~ 125°C | 250 kHz | - | Through Hole | Axial | 0.175" Dia x 0.500" L (4.44mm x 12.70mm) | - |
|
AS40-101K-RC100UH 10% AXIAL SHIELDED IND. |
4,280 |
|
Datasheet | AS40 | Axial | Bag | Active | - | - | 100 µH | ±10% | 160 mA | - | Shielded | 3.12Ohm Max | 50 @ 2.5MHz | 10MHz | - | -55°C ~ 125°C | 2.5 MHz | - | Through Hole | Axial | 0.162" Dia x 0.410" L (4.11mm x 10.41mm) | - |
|
|
AS40-104K-RC100MH 10% AXIAL SHIELDED IND. |
2,206 |
|
Datasheet | AS40 | Axial | Bag | Active | - | - | 100 mH | ±10% | 11 mA | - | Shielded | 678Ohm Max | 18 @ 7.9kHz | 110kHz | - | -55°C ~ 125°C | 7.9 kHz | - | Through Hole | Axial | 0.162" Dia x 0.410" L (4.11mm x 10.41mm) | - |
|
AC80-470J-RC47UH 5% AXIAL COATED INDUCTOR |
1,192 |
|
Datasheet | AC80 | Axial | Tape & Reel (TR) | Active | - | - | 47 µH | ±5% | 800 mA | - | - | 500mOhm Max | 40 @ 2.52MHz | 5MHz | - | -55°C ~ 125°C | 2.52 MHz | - | Through Hole | Axial | 0.205" Dia x 0.583" L (5.21mm x 14.80mm) | - |
|
APC30-473K-RC47MH 10% AXIAL POWER CHOKE |
2,343 |
|
Datasheet | APC30 | Axial | Bag | Active | - | - | 47 mH | ±10% | 100 mA | 131mA | - | 31.8Ohm Max | - | - | - | -55°C ~ 125°C | 19 kHz | - | Through Hole | Axial | 0.470" Dia x 0.920" L (11.94mm x 23.37mm) | - |
|
|
APC30-272K-RC2700UH 10% AXIAL POWER CHOKE |
3,139 |
|
Datasheet | APC30 | Axial | Bag | Active | - | - | 2.7 mH | ±10% | 400 mA | 530mA | - | 2.06Ohm Max | - | - | - | -55°C ~ 125°C | 13 kHz | - | Through Hole | Axial | 0.470" Dia x 0.920" L (11.94mm x 23.37mm) | - |
|
VTC100-330K-RC33UH 10% Vrt Mnt Toroidal Choke |
3,668 |
|
Datasheet | TC100 | Radial, Vertical (Open) | Tray | Active | Toroidal | - | 33 µH | ±10% | 2.5 A | 2.8A | Unshielded | 40mOhm Max | - | - | - | -55°C ~ 105°C | 1 kHz | - | Through Hole | Radial | 0.600" Dia (15.24mm) | - |
|
RFC20-102K-RC1000UH 10% RADIAL FLAT COIL |
3,923 |
|
Datasheet | - | Radial | Box | Active | Wirewound | - | 1 mH | ±10% | 210 mA | - | Unshielded | 8.6Ohm Max | 70 @ 790kHz | - | - | -20°C ~ 100°C | 790 kHz | - | Through Hole | Radial | 0.400" L x 0.125" W (10.16mm x 3.18mm) | 0.400" (10.16mm) |
|
|
RFC20-181K-RC180UH 10% RADIAL FLAT COIL |
3,609 |
|
Datasheet | - | Radial | Box | Active | Wirewound | - | 180 µH | ±10% | 580 mA | - | Unshielded | 2.07Ohm Max | 70 @ 790kHz | - | - | -20°C ~ 100°C | 790 kHz | - | Through Hole | Radial | 0.400" L x 0.125" W (10.16mm x 3.18mm) | 0.400" (10.16mm) |
Frequently Asked Questions
What are Fixed Inductors components used for?
Fixed Inductors components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Fixed Inductors part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Fixed Inductors parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.