D-Sub, D-Shaped Connector Backshells, Hoods
Review D-Sub, D-Shaped Connector Backshells, Hoods D-Sub, D-Shaped Connectors components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Accessory Type | Number of Positions | Compatible Shell Size | Compatible D-Sub Size | Cable Type | Cable Exit | Shielding | Primary Material | Material | Plating | Hardware | Features | Color |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MHEE-25-K25 WAY D-SUB HOOD DIE CAST TOP E |
152 |
|
Datasheet | MHEE | Bag | Active | Two Piece Backshell | 25 | B | 25pos and HD44pos | Round | 180° | Shielded | Metal | Zinc Die Cast | Nickel | Assembly Hardware, Cable Clamp, Grommets | Mating Screws 4-40 | Silver |
|
|
MHDM37-K37 WAY D-SUB HOOD DIE CAST TOP E |
108 |
|
Datasheet | MHDM | Bag | Active | Two Piece Backshell | 37 | C | 37pos and HD62pos | Round | 180° | Shielded | Metal | Zinc Die Cast | Nickel | Assembly Hardware, Cable Clamp, Grommets | Mating Screws 4-40 | Silver |
|
|
MHDCMR25-RA-K25 WAY D-SUB HOOD DIE CAST SIDE |
229 |
|
Datasheet | MHDCMR | Bag | Active | Two Piece Backshell | 25 | B | 25pos and HD44pos | Round | 90° | Shielded | Metal | Zinc Die Cast | Nickel | Assembly Hardware, Grommets | Mating Screws 4-40 | Silver |
|
|
MHDCMR9-DM9S-K9 WAY D-SUB HOOD DIE CAST SIDE E |
120 |
|
Datasheet | MHDCMR | Bag | Active | Two Piece Backshell | 9 | E | 9pos and HD15pos | Round | 90° | Shielded | Metal | Zinc Die Cast | Nickel | Assembly Hardware, Grommets | Mating Screws 4-40 | Silver |
|
|
MHDPPK9-R-K9 WAY D-SUB HOOD PLASTIC SNAP LO |
148 |
|
Datasheet | MHDPPK | Bag | Active | Two Piece Backshell | 9 | E | 9pos and HD15pos | Round | 180° | Unshielded | Plastic | Polyamide (PA66), Nylon 6/6 | - | Assembly Hardware, Grommets | Mating Screws 4-40 | Red |
|
|
MHD45PPK9-K9 WAY D-SUB HOOD PLASTIC SIDE EN |
1,773 |
|
Datasheet | MHD45PPK | Bag | Active | Two Piece Backshell | 9 | E | 9pos and HD15pos | Round | 45° | Unshielded | Plastic | Acrylonitrile Butadiene Styrene (ABS) | - | Assembly Hardware, Grommets | Mating Screws 4-40 | Black |
|
|
MHDPPK9-DE-K9 WAY D-SUB HOOD PLASTIC SNAP LO |
279 |
|
Datasheet | MHDPPK | Bag | Active | Two Piece Backshell | 9 | E | 9pos and HD15pos | Round | 180° | Unshielded | Plastic | Polyamide (PA66), Nylon 6/6 | - | Assembly Hardware, Grommets | Mating Screws 4-40 | Gray |
|
|
MHCCOV-9-SCL-MP9 WAY D-SUB HOOD METPLAS TOP ENT |
116 |
|
Datasheet | MHCCOV | Bag | Active | Two Piece Backshell | 9 | E | 9pos and HD15pos | Round | 180° | Shielded | Plastic | Acrylonitrile Butadiene Styrene (ABS) | Chromate | Assembly Hardware, Grommets | Mating Screws 4-40 | Silver |
|
|
MHD45PPK15-K15 WAY D-SUB HOOD PLASTIC SIDE E |
1,381 |
|
Datasheet | MHD45PPK | Bag | Active | Two Piece Backshell | 15 | A | 15pos and HD26pos | Round | 45° | Unshielded | Plastic | Acrylonitrile Butadiene Styrene (ABS) | - | Assembly Hardware, Grommets | Mating Screws 4-40 | Black |
|
|
MHTRI-P-15-K15 WAY D-SUB HOOD PLASTIC TRIPLE |
509 |
|
Datasheet | MHTRI | Bag | Active | Two Piece Backshell | 15 | A | 15pos and HD26pos | Round | 45°, 180° | Unshielded | Plastic | Acrylonitrile Butadiene Styrene (ABS) | - | Assembly Hardware, Grommets, Strain Relief | Mating Screws 4-40 | Black |
Frequently Asked Questions
What are D-Sub, D-Shaped Connector Backshells, Hoods components used for?
D-Sub, D-Shaped Connector Backshells, Hoods components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right D-Sub, D-Shaped Connector Backshells, Hoods part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find D-Sub, D-Shaped Connector Backshells, Hoods parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.