Backshells and Cable Clamps
Explore Backshells and Cable Clamps parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to ICMENU. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Type | Cable Opening | Diameter - Outside | Shell Size - Insert | Thread Size | Cable Exit | Primary Material | Material | Plating | Shielding | Color | Features | Ingress Protection |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
RM12WBP-CP(6)(71)CONN CAB CLAMP INT SZ12 SIL M13 |
0 |
|
Datasheet | RM-W | Bag | Obsolete | Cable Clamp, Internal | 0.295" (7.50mm) | 0.630" (16.00mm) | 12 | M13x0.75 | 180° | - | Brass, Zinc Alloy | Nickel | - | Silver | Gasket, Washer | IP67 - Dust Tight, Waterproof |
|
|
RM12WBP-CP(7)(71)CONN CAB CLAMP INT SZ12 SIL M13 |
0 |
|
Datasheet | RM-W | Bag | Obsolete | Cable Clamp, Internal | 0.295" (7.50mm) | 0.630" (16.00mm) | 12 | M13x0.75 | 180° | - | Brass, Zinc Alloy | Nickel | - | Silver | Gasket, Washer | IP67 - Dust Tight, Waterproof |
|
|
RM15WTP-CP(5)(71)CONN CAB CLAMP INT SZ15 SIL M16 |
0 |
|
Datasheet | RM-W | Bag | Obsolete | Cable Clamp, Internal | 0.256" (6.50mm) | 0.748" (19.00mm) | 15 | M16x0.75 | 180° | - | Brass, Zinc Alloy | Nickel | - | Silver | Gasket, Washer | IP67 - Dust Tight, Waterproof |
|
|
8D101F02CONN CABLE CLAMP SZ9 SILVER M12 |
0 |
|
Datasheet | MIL-DTL-38999 Series III | Bulk | Active | Cable Clamp | - | 0.858" (21.79mm) | 9 | M12x1 | 180° | - | Aluminum | Nickel | - | Silver | Clamp Screws | - |
|
|
JL05-28EB3B-(17)-RCONN BACKSH SZ28 BLK 1 5/8-18 |
0 |
|
Datasheet | JL05 | Bag | Obsolete | Backshell | 0.650" (16.50mm) | 1.850" (46.99mm) | 28 | 1 5/8-18 UNEF | 180° | - | Aluminum Alloy | Zinc | - | Black | Bushing, Sleeve | Weatherproof |
|
|
JL05-18EB3B-(11)-RCONN BACKSHELL SZ18 BLACK 1-20 |
0 |
|
Datasheet | JL05 | Bag | Obsolete | Backshell | 0.433" (11.00mm) | 1.260" (32.00mm) | 18 | 1-20 UNEF | 180° | - | Aluminum Alloy | Zinc | - | Black | Bushing, Sleeve | Waterproof |
|
|
JL04-2428CK(20)-CR-RCONN CAB CLMP SZ24 28 1 7/16-18 |
0 |
|
Datasheet | JL04V | Bag | Obsolete | Cable Clamp | 0.827" (21.00mm) | 1.657" (42.10mm) | 24, 28 | 1 7/16-18 UNEF-2B | 180° | - | Aluminum Alloy | Zinc | - | Black | Bushing, Clamp Screws, Washers | IP67 - Dust Tight, Waterproof |
|
|
JL05-20EB3B-(11)-RCONN BACKSH SZ20 BLK 1 1/8-18 |
0 |
|
Datasheet | JL05 | Bag | Obsolete | Backshell | 0.787" (20.00mm) | 1.417" (36.00mm) | 20 | 1 1/8-18 UNEF | 180° | - | Aluminum Alloy | Zinc | - | Black | Bushing, Sleeve | Waterproof |
|
|
JL05-24EB3B-(13)-RCONN BACKSH SZ24 BLK 1 3/8-18 |
0 |
|
Datasheet | JL05 | Bag | Obsolete | Backshell | 0.650" (16.50mm) | 1.614" (41.00mm) | 24 | 1 3/8-18 UNEF | 180° | - | Aluminum Alloy | Zinc | - | Black | Bushing, Sleeve | Weatherproof |
|
|
202M214-19BCONN BCK ADPT SZ14 15 13/16-20 |
0 |
|
Datasheet | 202M2 | Bulk | Obsolete | Backshell, Heat Shrink Adapter | - | 1.094" (27.79mm) | 14, 15 | 13/16-20 UNEF | 180° | - | Aluminum Alloy | Cadmium | Unshielded | Olive Drab | - | - |
|
|
213902-1CONN BCKSH W/CLMP SZ17 15/16-20 |
0 |
|
Datasheet | CPC | Bag | Active | Backshell, Cable Clamp | 0.703" (17.86mm) | 1.131" (28.73mm) | 17 | 15/16-20 UNEF | 180° | - | Polyamide (PA), Nylon | - | - | Black | Clamp Screws | - |
|
|
H/MS3057-12A(73)CONN CAB CLMP SZ20 22 1 3/16-18 |
0 |
|
Datasheet | H/MS | Bag | Obsolete | Cable Clamp | 0.449" ~ 0.625" (11.40mm ~ 15.90mm) | 1.339" (34.00mm) | 20, 22 | 1 3/16-18 UNEF | 180° | - | Aluminum Alloy | Chromate | - | Black | Clamp Screws | Waterproof |
|
|
HEX40-AC-90-11-A2-CCONN BACKSHELL ADPT SZ11 B SILV |
0 |
|
Datasheet | HexaShield | Box | Active | Backshell, Conduit Adapter | 0.850" (21.59mm) | 0.870" (22.10mm) | 11, B | M15x1 | 90° | - | Aluminum Alloy | Electroless Nickel | Shielded | Silver | Clamping Nut | - |
|
|
TXR41SJ90-1206AICONN BCKSH ADP SZ12 13 11/16-24 |
0 |
|
Datasheet | TXR | Box | Active | Backshell, Heat Shrink Adapter | - | 0.965" (24.50mm) | 12, 13 | 11/16-24 UNEF | 90° | - | Stainless Steel | Passivated | Shielded | - | Tinel Lock | - |
|
|
202M503-19BCONN BCKSH ADPT SZ8S 10S 1/2-28 |
0 |
|
Datasheet | 202M5 | Bulk | Obsolete | Backshell, Heat Shrink Adapter | - | 0.781" (19.84mm) | 8S, 10S | 1/2-28 UNEF-2B | 180° | - | Aluminum Alloy | Cadmium | Unshielded | Olive Drab | Drain Hole | - |
|
|
209M322-19BCONN BACKSHELL ADPT SZ23 H M34 |
0 |
|
Datasheet | 209M3 | Bulk | Obsolete | Backshell, Heat Shrink Adapter | - | 1.625" (41.28mm) | 23, H | M34x1 | 180° | - | Aluminum Alloy | Cadmium | Unshielded | Olive Drab | - | Environment Resistant |
|
|
209M412-19BCONN BACKSHELL ADPT SZ13 C M18 |
0 |
|
Datasheet | 209M4 | Bulk | Obsolete | Backshell, Heat Shrink Adapter | - | 0.965" (24.50mm) | 13, C | M18x1 | 180° | - | Aluminum Alloy | Cadmium | Unshielded | Olive Drab | - | Environment Resistant |
|
|
209M424-19BCONN BACKSHELL ADPT SZ25 J M37 |
0 |
|
Datasheet | 209M4 | Bulk | Obsolete | Backshell, Heat Shrink Adapter | - | 1.713" (43.50mm) | 25, J | M37x1 | 180° | - | Aluminum Alloy | Cadmium | Unshielded | Olive Drab | - | Environment Resistant |
|
|
202M110-19BCONN BCKSH ADPT SZ10 11 9/16-24 |
0 |
|
Datasheet | 202M1 | Bulk | Obsolete | Backshell, Heat Shrink Adapter | - | 0.807" (20.50mm) | 10, 11 | 9/16-24 UNEF | 180° | - | Aluminum Alloy | Cadmium | Unshielded | Olive Drab | - | - |
|
|
203M018-19B08CONN BACKSH ADPT SZ18 27 OLIV |
0 |
|
Datasheet | 203M0 | Bulk | Obsolete | Backshell, Heat Shrink Adapter | - | 1.217" (30.90mm) | 18, 27 | 1 1/16-18 UNEF | 180° | - | Aluminum Alloy | Cadmium | Shielded | Olive Drab | Termination Ring | - |
Frequently Asked Questions
What are Backshells and Cable Clamps components used for?
Backshells and Cable Clamps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Backshells and Cable Clamps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Backshells and Cable Clamps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.