Chip Resistor - Surface Mount
Review Chip Resistor - Surface Mount Resistors components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Resistance | Tolerance | Power (Watts) | Composition | Features | Temperature Coefficient | Operating Temperature | Supplier Device Package | Ratings | Size / Dimension | Height - Seated (Max) | Number of Terminations | Failure Rate |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CRT0603-BY-1002ESTRES 10K OHM 0.1% 1/10W 0603 |
0 |
|
Datasheet | CRT-ST | 0603 (1608 Metric) | Tape & Reel (TR) | Obsolete | 10 kOhms | ±0.1% | 0.1W, 1/10W | Thin Film | Current Sense | ±25ppm/°C | -55°C ~ 155°C | - | 0603 | 0.063" L x 0.031" W (1.60mm x 0.80mm) | 0.022" (0.55mm) | 2 | - |
|
|
CRM2010-FX-3R30ELFRESHIGHPOWER 2010 3R30 1% 1W TC1 |
0 |
|
Datasheet | CRM2010 | 2010 (5025 Metric) | Tape & Reel (TR) | Active | 3.3 Ohms | ±1% | 1W | Thick Film | Current Sense | ±100ppm/°C | -55°C ~ 155°C | - | 2010 | 0.197" L x 0.098" W (5.00mm x 2.50mm) | 0.028" (0.70mm) | 2 | - |
|
|
CHV2010-JW-154ELFRES SMD 150K OHM 5% 1/2W 2010 |
0 |
|
Datasheet | CHV | 2010 (5025 Metric) | Tape & Reel (TR) | Active | 150 kOhms | ±5% | 0.5W, 1/2W | Thick Film | High Voltage | ±200ppm/°C | -55°C ~ 155°C | - | 2010 | 0.197" L x 0.098" W (5.00mm x 2.50mm) | 0.028" (0.70mm) | 2 | - |
|
|
CHV2010-JW-226ELFRESHIGHVOLTAGE 2010 22M 5% 500MW |
0 |
|
Datasheet | CHV | 2010 (5025 Metric) | Tape & Reel (TR) | Active | 22 MOhms | ±5% | 0.5W, 1/2W | Thick Film | High Voltage | ±200ppm/°C | -55°C ~ 155°C | - | 2010 | 0.197" L x 0.098" W (5.00mm x 2.50mm) | 0.028" (0.70mm) | 2 | - |
|
CRM2512-FX-3012ELFRES SMD 30.1K OHM 1% 2W 2512 |
0 |
|
Datasheet | CRM2512 | 2512 (6432 Metric) | Tape & Reel (TR) | Active | 30.1 kOhms | ±1% | 2W | Thick Film | Current Sense | ±100ppm/°C | -55°C ~ 155°C | - | 2512 | 0.248" L x 0.122" W (6.30mm x 3.10mm) | 0.031" (0.80mm) | 2 | - |
|
|
CRL2010-FW-R110ELFRES 0.11 OHM 1% 3/4W 2010 |
0 |
|
Datasheet | CRL | 2010 (5025 Metric) | Tape & Reel (TR) | Active | 110 mOhms | ±1% | 0.75W, 3/4W | Thick Film | - | ±200ppm/°C | -55°C ~ 155°C | - | 2010 | 0.197" L x 0.098" W (5.00mm x 2.50mm) | 0.028" (0.70mm) | 2 | - |
|
|
CRL2010-FW-R120ELFRES 0.12 OHM 1% 3/4W 2010 |
0 |
|
Datasheet | CRL | 2010 (5025 Metric) | Tape & Reel (TR) | Active | 120 mOhms | ±1% | 0.75W, 3/4W | Thick Film | - | ±200ppm/°C | -55°C ~ 155°C | - | 2010 | 0.197" L x 0.098" W (5.00mm x 2.50mm) | 0.028" (0.70mm) | 2 | - |
|
|
CRL2010-FW-R130ELFRES 0.13 OHM 1% 3/4W 2010 |
0 |
|
Datasheet | CRL | 2010 (5025 Metric) | Tape & Reel (TR) | Active | 130 mOhms | ±1% | 0.75W, 3/4W | Thick Film | - | ±200ppm/°C | -55°C ~ 155°C | - | 2010 | 0.197" L x 0.098" W (5.00mm x 2.50mm) | 0.028" (0.70mm) | 2 | - |
|
|
CRL2010-FW-R150ELFRES 0.15 OHM 1% 3/4W 2010 |
0 |
|
Datasheet | CRL | 2010 (5025 Metric) | Tape & Reel (TR) | Active | 150 mOhms | ±1% | 0.75W, 3/4W | Thick Film | - | ±200ppm/°C | -55°C ~ 155°C | - | 2010 | 0.197" L x 0.098" W (5.00mm x 2.50mm) | 0.028" (0.70mm) | 2 | - |
|
|
CRL2010-FW-R160ELFRES 0.16 OHM 1% 3/4W 2010 |
0 |
|
Datasheet | CRL | 2010 (5025 Metric) | Tape & Reel (TR) | Active | 160 mOhms | ±1% | 0.75W, 3/4W | Thick Film | - | ±200ppm/°C | -55°C ~ 155°C | - | 2010 | 0.197" L x 0.098" W (5.00mm x 2.50mm) | 0.028" (0.70mm) | 2 | - |
Frequently Asked Questions
What are Chip Resistor - Surface Mount components used for?
Chip Resistor - Surface Mount components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Chip Resistor - Surface Mount part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Chip Resistor - Surface Mount parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.