Chip Resistor - Surface Mount
Review Chip Resistor - Surface Mount Resistors components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Resistance | Tolerance | Power (Watts) | Composition | Features | Temperature Coefficient | Operating Temperature | Supplier Device Package | Ratings | Size / Dimension | Height - Seated (Max) | Number of Terminations | Failure Rate |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
S3-15RF1RES SMD 15 OHM 1% 3W 6327 |
2 |
|
Datasheet | S | 6327 J-Lead | Tape & Reel (TR) | Active | 15 Ohms | ±1% | 3W | Wirewound | Current Sense, Flame Proof, Moisture Resistant, Pulse Withstanding, Safety | ±20ppm/°C | -55°C ~ 275°C | - | - | 0.626" L x 0.272" W (15.90mm x 6.90mm) | 0.268" (6.80mm) | 2 | - |
|
PFS35-0R05J1RES 0.05 OHM 5% 35W TO263 DPAK |
0 |
|
Datasheet | PFS35 | Non-Standard DPAK | Tape & Reel (TR) | Active | 50 mOhms | ±5% | 35W | Thin Film | Current Sense, Pulse Withstanding | ±250ppm/°C | -55°C ~ 155°C | - | DPAK in TO-263 Housing | 0.406" L x 0.398" W (10.30mm x 10.10mm) | 0.185" (4.70mm) | 2 | - |
|
S4-1K5F1RES SMD 1.5K OHM 1% 2W 4525 |
0 |
|
Datasheet | S | 4525 J-Lead | Tape & Reel (TR) | Active | 1.5 kOhms | ±1% | 2W | Wirewound | Current Sense, Flame Proof, Moisture Resistant, Pulse Withstanding, Safety | ±20ppm/°C | -55°C ~ 275°C | - | - | 0.449" L x 0.252" W (11.40mm x 6.40mm) | 0.197" (5.00mm) | 2 | - |
|
S4-3R3F1RES 2W SMD 4525 3.3 OHM 1% |
0 |
|
Datasheet | S | 4525 J-Lead | Tape & Reel (TR) | Active | 3.3 Ohms | ±1% | 2W | Wirewound | Flame Retardant Coating, Safety | ±50ppm/°C | -55°C ~ 275°C | - | 4525 | 0.449" L x 0.252" W (11.40mm x 6.40mm) | 0.197" (5.00mm) | 2 | - |
|
S2-0R36J2RES 0.36 OHM 5% 1W J LEAD |
0 |
|
Datasheet | S | 2615 J-Lead | Tape & Reel (TR) | Active | 360 mOhms | ±5% | 1W | Wirewound | Current Sense, Flame Proof, Moisture Resistant, Pulse Withstanding, Safety | - | -55°C ~ 275°C | - | - | 0.260" L x 0.154" W (6.60mm x 3.90mm) | 0.142" (3.60mm) | 2 | - |
|
|
S2-3KF1RES SMD 3K OHM 1% 1W 2615 |
0 |
|
Datasheet | S | 2615 J-Lead | Tape & Reel (TR) | Active | 3 kOhms | ±1% | 1W | Wirewound | Current Sense, Flame Proof, Moisture Resistant, Pulse Withstanding, Safety | ±20ppm/°C | -55°C ~ 275°C | - | - | 0.260" L x 0.154" W (6.60mm x 3.90mm) | 0.142" (3.60mm) | 2 | - |
|
|
S5-0R1F1RES 4W SMD 8230 0.1 OHM 1% 90PPM |
0 |
|
Datasheet | S | 8230 J-Lead | Tape & Reel (TR) | Active | 100 mOhms | ±1% | 4W | Wirewound | Flame Retardant Coating, Safety | - | -55°C ~ 275°C | - | 8230 | 0.819" L x 0.296" W (20.80mm x 7.50mm) | - | 2 | - |
|
|
PFS35-2R2F1RES SMD 2.2OHM 1% 35W TO263 DPAK |
0 |
|
Datasheet | PFS35 | Non-Standard DPAK | Tape & Reel (TR) | Active | 2.2 Ohms | ±1% | 35W | Thin Film | Current Sense, Pulse Withstanding | ±100ppm/°C | -55°C ~ 155°C | - | DPAK in TO-263 Housing | 0.406" L x 0.398" W (10.30mm x 10.10mm) | 0.185" (4.70mm) | 2 | - |
|
|
PFS35-15RF1RES SMD 15 OHM 1% 35W TO263 DPAK |
0 |
|
Datasheet | PFS35 | Non-Standard DPAK | Tape & Reel (TR) | Active | 15 Ohms | ±1% | 35W | Thin Film | Current Sense, Pulse Withstanding | ±50ppm/°C | -55°C ~ 155°C | - | DPAK in TO-263 Housing | 0.406" L x 0.398" W (10.30mm x 10.10mm) | 0.185" (4.70mm) | 2 | - |
|
FPS2B-0R36F1RES 0.36 OHM 1% 1.5W D2PAK |
0 |
|
Datasheet | FPS | TO-263-3, D2PAK (2 Leads + Tab), TO-263AB | Tape & Reel (TR) | Active | 360 mOhms | ±1% | 1.5W | Metal Foil | Current Sense, Non-Inductive | ±50ppm/°C | -40°C ~ 130°C | - | D2PAK | 0.500" L x 0.400" W (12.70mm x 10.16mm) | 0.161" (4.10mm) | 2 | - |
Frequently Asked Questions
What are Chip Resistor - Surface Mount components used for?
Chip Resistor - Surface Mount components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Chip Resistor - Surface Mount part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Chip Resistor - Surface Mount parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.