Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
1424537CABLE GLAND 6-11MM M20 POLYAMIDE |
3,501 |
|
Datasheet | Cable Gland | 0.236" (6.00mm) | 0.433" (11.00mm) | M20x1.5 | 0.394" (10.00mm) | - | - | Polyamide (PA), Nylon | Gasket, Seal | Black | IP66/IP67 - Dust Tight, Water Resistant, Waterproof | -20°C ~ 100°C | |
|
|
1411077CABLE GLAND 11.18-20MM M25 BRASS |
2,038 |
|
Datasheet | Cable Gland | 0.440" (11.18mm) | 0.787" (20.00mm) | M25 | 0.591" (15.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP67/IP68 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 130°C | |
|
|
1415163CABLE GLAND 6-13MM M20 BRASS |
1,285 |
|
Datasheet | Cable Gland | 0.236" (6.00mm) | 0.512" (13.00mm) | M20 | 0.472" (12.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 75°C | |
|
|
1424544CABLE GLAND 11-16.99MM M25 |
2,216 |
|
Datasheet | Cable Gland | 0.433" (11.00mm) | 0.669" (16.99mm) | M25x1.5 | 0.315" (8.00mm) | - | - | Stainless Steel | O-Ring, Seal | Silver | IP66/IP68/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1424545CABLE GLAND 15-21MM M32 S STEEL |
2,765 |
|
Datasheet | Cable Gland | 0.591" (15.00mm) | 0.827" (21.00mm) | M32x1.5 | 0.315" (8.00mm) | - | - | Stainless Steel | O-Ring, Seal | Silver | IP66/IP68/IP69 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
|
1411193CABLE GLAND 24-35MM M50 BRASS |
1,499 |
|
Datasheet | Cable Gland | 0.945" (24.00mm) | 1.378" (35.00mm) | M50 | 0.354" (9.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof; NEMA 4X | -40°C ~ 100°C | |
|
|
1424531CABLE GLAND 37-53MM M63 BRASS |
3,847 |
|
Datasheet | Cable Gland | 1.457" (37.00mm) | 2.087" (53.00mm) | M63x1.5 | 0.394" (10.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68/IP69 - Dust Tight, Water Resistant, Waterproof; NEMA 4X | -40°C ~ 100°C | |
|
|
1424495CABLE GLAND 3-6.5MM PG7 POLYAMID |
3,578 |
|
Datasheet | Cable Gland | 0.118" (3.00mm) | 0.256" (6.50mm) | PG7 | 0.315" (8.00mm) | - | - | Polyamide (PA), Nylon | Seal | Black | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
1424476CABLE GLAND 10-14MM M20 POLYAMID |
3,887 |
|
Datasheet | Cable Gland | 0.394" (10.00mm) | 0.551" (14.00mm) | M20x1.5 | 0.394" (10.00mm) | - | - | Polyamide (PA), Nylon | Seal | Gray | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C | |
|
1411156CABLE GLAND 5-10MM 3/8" NPT |
4,644 |
|
Datasheet | Cable Gland | 0.197" (5.00mm) | 0.394" (10.00mm) | 3/8" NPT | 0.591" (15.00mm) | - | - | Polyamide (PA), Nylon | Seal | Black | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 100°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.