Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
1415147CABLE GLAND 34-48MM M63 BRASS |
1,302 |
|
Datasheet | Cable Gland | 1.339" (34.00mm) | 1.890" (48.00mm) | M63 | 0.591" (15.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 75°C | |
|
|
1411194CABLE GLAND 32-42MM M63 BRASS |
3,541 |
|
Datasheet | Cable Gland | 1.260" (32.00mm) | 1.654" (42.00mm) | M63 | 0.394" (10.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP68 - Dust Tight, Waterproof; NEMA 4X | -40°C ~ 100°C | |
|
|
1415169CABLE GLAND 21-35MM M50 BRASS |
1,825 |
|
Datasheet | Cable Gland | 0.827" (21.00mm) | 1.378" (35.00mm) | M50 | 0.591" (15.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 75°C | |
|
|
1411091CABLE GLAND 12.5-20.9MM M20 |
3,824 |
|
Datasheet | Cable Gland | 0.492" (12.50mm) | 0.823" (20.90mm) | M20 | 0.591" (15.00mm) | - | - | Stainless Steel | O-Ring, Seal | Silver | IP66/IP67/IP68 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 130°C | |
|
|
1411097CABLE GLND 27.9-40.4MM M40 BRASS |
2,289 |
|
Datasheet | Cable Gland | 1.098" (27.90mm) | 1.591" (40.40mm) | M40 | 0.591" (15.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP67/IP68 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 130°C | |
|
|
1411082CABLE GLAND 23.5-32.2MM M40 |
2,549 |
|
Datasheet | Cable Gland | 0.925" (23.50mm) | 1.268" (32.20mm) | M40 | 0.591" (15.00mm) | - | - | Stainless Steel | O-Ring, Seal | Silver | IP66/IP67/IP68 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 130°C | |
|
|
1415170CABLE GLAND 34-48MM M63 BRASS |
2,194 |
|
Datasheet | Cable Gland | 1.339" (34.00mm) | 1.890" (48.00mm) | M63 | 0.591" (15.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -40°C ~ 75°C | |
|
|
1411093CABLE GLAND 18.2-26.2MM M25 |
3,067 |
|
Datasheet | Cable Gland | 0.717" (18.20mm) | 1.031" (26.20mm) | M25 | 0.591" (15.00mm) | - | - | Stainless Steel | O-Ring, Seal | Silver | IP66/IP67/IP68 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 130°C | |
|
|
1411100CABLE GLND 40.4-53.1MM M50 BRASS |
3,120 |
|
Datasheet | Cable Gland | 1.591" (40.40mm) | 2.091" (53.10mm) | M50 | 0.591" (15.00mm) | - | - | Brass, Nickel Plated | O-Ring, Seal | Silver | IP66/IP67/IP68 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 130°C | |
|
|
1411095CABLE GLAND 23.7-33.9MM M32 |
3,418 |
|
Datasheet | Cable Gland | 0.933" (23.70mm) | 1.335" (33.90mm) | M32 | 0.591" (15.00mm) | - | - | Stainless Steel | O-Ring, Seal | Silver | IP66/IP67/IP68 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 130°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.