Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LEX263VA/316LHTSCABLE GLAND 44-56MM M63 S STEEL |
2,828 |
|
Datasheet | Cable Gland | 1.732" (44.00mm) | 2.205" (56.00mm) | M63x1.5 | 0.630" (16.00mm) | - | 2.480" (63.0mm) | Stainless Steel | O-Ring | Silver | IP66/IP68 - Dust Tight, Water Resistant, Waterproof | -60°C ~ 130°C | |
|
96579.6CABLE FEEDTHROUGH 70.1-76.96MM |
2,906 |
|
Datasheet | Cable Feedthrough | 2.760" (70.10mm) | 3.030" (76.96mm) | M85x2 | 0.590" (14.99mm) | - | 3.350" (85.1mm) | Brass, Nickel Plated | Sealing Ring | Silver | IP68 - Dust Tight, Waterproof; NEMA 4X | -40°C ~ 300°C | |
|
96572.0CABLE FEEDTHROUGH 8.89-13.97MM |
4,673 |
|
Datasheet | Cable Feedthrough | 0.350" (8.89mm) | 0.550" (13.97mm) | M20x1.5 | 0.260" (6.60mm) | - | 0.790" (20.1mm) | Polyamide (PA), Nylon | - | Light Gray | IP68 - Dust Tight, Waterproof; NEMA 4X | -20°C ~ 100°C | |
|
96573.1CABLE FEEDTHROUGH 16-20.07MM M25 |
4,806 |
|
Datasheet | Cable Feedthrough | 0.630" (16.00mm) | 0.790" (20.07mm) | M25x1.5 | 0.300" (7.62mm) | - | 0.980" (24.9mm) | Polyamide (PA), Nylon | - | Black | IP68 - Dust Tight, Waterproof; NEMA 4X | -20°C ~ 100°C | |
|
96574.0CABLE FEED 20.07-24.89MM M32 |
3,933 |
|
Datasheet | Cable Feedthrough | 0.790" (20.07mm) | 0.980" (24.89mm) | M32x1.5 | 0.310" (7.87mm) | - | 1.260" (32.0mm) | Polyamide (PA), Nylon | - | Light Gray | IP68 - Dust Tight, Waterproof; NEMA 4X | -20°C ~ 100°C | |
|
96574.1CABLE FEED 20.07-24.89MM M32 |
4,334 |
|
Datasheet | Cable Feedthrough | 0.790" (20.07mm) | 0.980" (24.89mm) | M32x1.5 | 0.310" (7.87mm) | - | 1.260" (32.0mm) | Polyamide (PA), Nylon | - | Black | IP68 - Dust Tight, Waterproof; NEMA 4X | -20°C ~ 100°C | |
|
21750.6CABLE GLAND 4-6.5MM PG7 BRASS |
1,227 |
|
Datasheet | Cable Gland | 0.157" (4.00mm) | 0.256" (6.50mm) | PG7 | 0.200" (5.08mm) | - | - | Brass, Nickel Plated | - | Silver | IP68 - Dust Tight, Waterproof | - | |
|
97603.6CABLE GLAND 4.06-6.6MM M16 BRASS |
2,487 |
|
Datasheet | Cable Gland | 0.160" (4.06mm) | 0.260" (6.60mm) | M16x1.5 | 0.240" (6.10mm) | - | 0.630" (16.0mm) | Brass, Nickel Plated | Sealing Ring | Silver | IP54 - Dust Protected, Water Resistant; NEMA 13 | -40°C ~ 300°C | |
|
97602.6CABLE GLND 5.59-8.89MM M12 BRASS |
3,711 |
|
Datasheet | Cable Gland | 0.220" (5.59mm) | 0.350" (8.89mm) | M12x1.5 | 0.197" (5.00mm) | - | 0.470" (11.9mm) | Brass, Nickel Plated | Sealing Ring, Strain Relief | Silver | IP54 - Dust Protected, Water Resistant; NEMA 13 | -40°C ~ 300°C | |
|
21650.6CABLE GLAND 4.06-6.6MM PG9 BRASS |
2,713 |
|
Datasheet | Cable Gland | 0.160" (4.06mm) | 0.260" (6.60mm) | PG9 | 0.240" (6.10mm) | - | 0.600" (15.2mm) | Brass, Nickel Plated | Sealing Ring | Silver | IP68 - Dust Tight, Waterproof; NEMA 4X | -40°C ~ 300°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.