Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
50616PA7035/4X35CABLE GLAND M16 POLYAMIDE |
3,311 |
|
Datasheet | Cable Gland | - | - | M16x1.5 | 0.315" (8.00mm) | - | - | Polyamide (PA6), Nylon 6 | Seal | Gray | IP65 - Dust Tight, Water Resistant | -40°C ~ 100°C | |
|
50.616 PA/FLCABLE GLAND 5-10MM M16 POLYAMIDE |
1,888 |
|
Datasheet | Cable Gland | 0.197" (5.00mm) | 0.394" (10.00mm) | M16x1.5 | 0.315" (8.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
50.112 PACABLE GLAND 10-14MM 1/2" NPT |
2,511 |
|
Datasheet | Cable Gland | 0.394" (10.00mm) | 0.551" (14.00mm) | 1/2" NPT | 0.591" (15.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
50.011PA/SW/GCABLE GLAND 5-10MM PG11 POLY SET |
3,388 |
|
Datasheet | Cable Gland | 0.197" (5.00mm) | 0.394" (10.00mm) | PG11 | 0.315" (8.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | - | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
50013/7035/15CABLE GLAND 6-12MM PG13.5 |
4,912 |
|
Datasheet | Cable Gland | 0.236" (6.00mm) | 0.472" (12.00mm) | PG13.5 | 0.591" (15.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
50.620 PA/FLCABLE GLAND 8-13MM M20 POLYAMIDE |
1,896 |
|
Datasheet | Cable Gland | 0.315" (8.00mm) | 0.512" (13.00mm) | M20x1.5 | 0.315" (8.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
50620PA7035/2X6CABLE GLAND M20 POLYAMIDE |
1,743 |
|
Datasheet | Cable Gland | - | - | M20x1.5 | 0.315" (8.00mm) | - | - | Polyamide (PA6), Nylon 6 | Seal | Gray | IP65 - Dust Tight, Water Resistant | -40°C ~ 100°C | |
|
50011PABS7035CABLE GLAND 5-10MM PG11 POLYAMID |
2,027 |
|
Datasheet | Cable Gland | 0.197" (5.00mm) | 0.394" (10.00mm) | PG11 | 0.315" (8.00mm) | - | - | Polyamide (PA6), Nylon 6 | Strain Relief | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
50016/7035/15CABLE GLAND 10-14MM PG16 |
3,906 |
|
Datasheet | Cable Gland | 0.394" (10.00mm) | 0.551" (14.00mm) | PG16 | 0.591" (15.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
50.016 PASW15CABLE GLAND 10-14MM PG16 |
4,451 |
|
Datasheet | Cable Gland | 0.394" (10.00mm) | 0.551" (14.00mm) | PG16 | 0.591" (15.00mm) | - | - | Polyamide (PA6), Nylon 6 | Sealing Ring | Black | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.