Cable and Cord Grips
Review Cable and Cord Grips Cables, Wires - Management components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Type | Outside Cable Diameter (Min) | Outside Cable Diameter (Max) | Thread Size | Thread Length | Conduit Hub Size | Panel Hole Size | Material | Includes | Color | Ingress Protection | Operating Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
50036M40PASWPERFECT CABLE GLAND M 40X1,5 POL |
3,421 |
|
Datasheet | Cable Gland | 0.866" (22.00mm) | 1.260" (32.00mm) | M40x1.5 | 0.709" (18.01mm) | - | - | Polyamide (PA6), Nylon 6 | - | Black | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
50036M40PA7035PERFECT CABLE GLAND M 40X1,5 POL |
3,370 |
|
Datasheet | Cable Gland | 0.866" (22.00mm) | 1.260" (32.00mm) | M40x1.5 | 0.709" (18.01mm) | - | - | Polyamide (PA6), Nylon 6 | - | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
50036M40PAPERFECT CABLE GLAND M 40X1,5 - P |
1,586 |
|
Datasheet | Cable Gland | 0.866" (22.00mm) | 1.260" (32.00mm) | M40x1.5 | 0.709" (18.01mm) | - | - | Polyamide (PA6), Nylon 6 | - | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
21.720MCABLE GLAND RA 7-12MM M20 ZINC |
3,999 |
|
Datasheet | Cable Gland - 90° | 0.276" (7.00mm) | 0.472" (12.00mm) | M20x1.5 | 0.630" (16.00mm) | - | - | Zinc, Nickel Plated | O-Ring, Seal | Silver | IP55 - Dust Protected, Water Resistant | -20°C ~ 100°C | |
|
|
21.113ZINC ELBOW WITH BRASS PRESSURE S |
3,806 |
|
Datasheet | Cable Gland - 90° | 0.236" (6.00mm) | 0.512" (13.00mm) | PG13.5 | 0.256" (6.50mm) | - | - | Brass, Nickel Plated | - | Silver | IP55 - Dust Protected, Water Resistant | -20°C ~ 100°C | |
|
|
22.621FAVORIT CABLE GLAND PG 21 - POLY |
1,734 |
|
Datasheet | Cable Gland | 0.512" (13.00mm) | 0.669" (16.99mm) | PG21 | 0.433" (11.00mm) | - | - | Polyamide (PA6), Nylon 6 | - | Gray | IP55 - Dust Protected, Water Resistant | -30°C ~ 80°C | |
|
|
50.640PA/R7035/GCABLE GLAND SET WITH LOCKNUT M40 |
2,354 |
|
Datasheet | Cable Gland | 0.630" (16.00mm) | 1.102" (28.00mm) | M40x1.5 | 0.394" (10.00mm) | - | - | Polyamide (PA6), Nylon 6 | - | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C | |
|
|
19.511KLEMMBACKEN CABLE GLAND BRASS PG |
3,160 |
|
Datasheet | Cable Gland | 0.315" (8.00mm) | 0.472" (12.00mm) | PG11 | 0.236" (6.00mm) | - | - | Brass, Nickel Plated | - | Silver | IP54 - Dust Protected, Water Resistant | -30°C ~ 100°C | |
|
|
22.613FAVORIT CABLE GLAND PG 13 - POLY |
2,339 |
|
Datasheet | Cable Gland | 0.354" (9.00mm) | 0.433" (11.00mm) | PG13.5 | 0.354" (9.00mm) | - | - | Polyamide (PA6), Nylon 6 | - | Gray | IP55 - Dust Protected, Water Resistant | -30°C ~ 80°C | |
|
|
50.640 PA/FL7035PERFECT CABLE GLANDS POLYAMIDE V |
1,444 |
|
Datasheet | Cable Gland | 0.748" (19.00mm) | 1.102" (28.00mm) | M40x1.5 | 0.394" (10.00mm) | - | - | Polyamide (PA6), Nylon 6 | - | Gray | IP68 - Dust Tight, Waterproof | -40°C ~ 100°C |
Frequently Asked Questions
What are Cable and Cord Grips components used for?
Cable and Cord Grips components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Cable and Cord Grips part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find Cable and Cord Grips parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.