3D Printing Materials
Review 3D Printing Materials Prototyping, Fabrication Products components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Filament Material | Color | Filament Diameter | Weight | Tensile Strength | Flex Strength | Density | Operating Temperature | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
100013PUREFIL 3D FILAMENT DEEP ORANGE |
3,520 |
|
Datasheet | ABS | Box | Active | ABS (Acrylonitrile Butadiene Styrene) | Orange | 0.070" (1.75mm) | - | - | 47Mpa | 1.05g/cm³ | 210°C ~ 260°C | - |
|
|
100011PUREFIL 3D FILAMENT TELEMAGENTA |
2,688 |
|
Datasheet | ABS | Active | ABS (Acrylonitrile Butadiene Styrene) | Magenta | 0.070" (1.75mm) | - | - | 47Mpa | 1.05g/cm³ | 210°C ~ 260°C | - | |
|
|
100902PUREFIL 3D FILAMENT SIGNAL YELLO |
3,535 |
|
Datasheet | PETG | Box | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Yellow | 0.070" (1.75mm) | - | - | 50Mpa | 1.29g/cm³ | 210°C ~ 260°C | - |
|
|
100401PUREFIL 3D FILAMENT TRANSPARENT |
1,006 |
|
Datasheet | PETG | Box | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Transparent | 0.070" (1.75mm) | - | - | 50Mpa | 1.29g/cm³ | 210°C ~ 260°C | - |
|
|
100368PUREFIL 3D FILAMENT BLUE TRANSPA |
1,426 |
|
Datasheet | PETG | Box | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Transparent (Blue) | 0.070" (1.75mm) | - | - | 50Mpa | 1.29g/cm³ | 210°C ~ 260°C | - |
|
|
100370PUREFIL 3D FILAMENT YELLOW TRANS |
3,878 |
|
Datasheet | PETG | Box | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Transparent (Yellow) | 0.070" (1.75mm) | - | - | 50Mpa | 1.29g/cm³ | 210°C ~ 260°C | - |
|
|
100863PUREFIL 3D FILAMENT TRAFFIC RED |
3,830 |
|
Datasheet | PETG | Box | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Red (Traffic Red) | 0.070" (1.75mm) | - | - | 50Mpa | 1.29g/cm³ | 210°C ~ 260°C | - |
|
|
100903PUREFIL 3D FILAMENT LIME GREEN P |
2,517 |
|
Datasheet | PETG | Box | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Green (Light Green) | 0.070" (1.75mm) | - | - | 50Mpa | 1.29g/cm³ | 210°C ~ 260°C | - |
|
|
100367PUREFIL 3D FILAMENT RED TRANSPAR |
2,567 |
|
Datasheet | PETG | Box | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Transparent (Red) | 0.070" (1.75mm) | - | - | 50Mpa | 1.29g/cm³ | 210°C ~ 260°C | - |
|
|
100371PUREFIL 3D FILAMENT GREEN TRANSP |
4,338 |
|
Datasheet | PETG | Box | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Transparent (Green) | 0.070" (1.75mm) | - | - | 50Mpa | 1.29g/cm³ | 210°C ~ 260°C | - |
Frequently Asked Questions
What are 3D Printing Materials components used for?
3D Printing Materials components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right 3D Printing Materials part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find 3D Printing Materials parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.