3D Printing Materials
Review 3D Printing Materials Prototyping, Fabrication Products components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to ICMENU for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Filament Material | Color | Filament Diameter | Weight | Tensile Strength | Flex Strength | Density | Operating Temperature | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
JA3D-C1001141SEBS 1300 95A BLK, 1.75MM, 1KG S |
4,154 |
|
Datasheet | - | Spool | Active | TPE (Thermoplastic Elastomer) | Black | 0.070" (1.75mm) | - | 11Mpa | - | 1.05g/cm³ ~ 1.18g/cm³ | 230°C ~ 270°C | Elastomeric, Wear & Friction |
|
JA3D-C1001138SEBS 1300 95A NAT, 2.85MM, 1KG S |
3,754 |
|
Datasheet | - | Spool | Active | TPE (Thermoplastic Elastomer) | Natural | 0.112" (2.85mm) | - | 11Mpa | - | 1.05g/cm³ | 230°C ~ 270°C | Elastomeric, Wear & Friction |
|
JA3D-C1001029PETG NAT 2.85MM, 1KG SPOOL |
1,785 |
|
Datasheet | - | Spool | Active | PETG (Polyethylene Terephthalate Glycol-modified) | Natural | 0.112" (2.85mm) | - | - | - | 1.24g/cm³ | 240°C ~ 250°C | - |
|
JA3D-C1001135SEBS 1300 85A BLK, 2.85MM, 1KG S |
2,584 |
|
Datasheet | - | Spool | Active | TPE (Thermoplastic Elastomer) | Black | 0.112" (2.85mm) | - | 6Mpa | - | 1.05g/cm³ | 240°C ~ 250°C | Elastomeric, Wear & Friction |
|
JA3D-C1001093SEBS 1300 85A NAT, 2.85MM, 1KG S |
3,397 |
|
Datasheet | - | Spool | Active | TPE (Thermoplastic Elastomer) | Natural | 0.112" (2.85mm) | - | 6Mpa | - | 1.05g/cm³ | 240°C ~ 250°C | Elastomeric, Wear & Friction |
|
JA3D-C1001305PA 4500 GRY, 1.75MM, 0.75KG |
1,218 |
|
Datasheet | PA 4500 | Spool | Active | PA (Polyamide) | Gray | 0.070" (1.75mm) | - | - | - | - | - | - |
|
JA3D-C1001054ABS 1400 LW, 1.75MM, 1KG SPOOL |
3,798 |
|
Datasheet | - | Spool | Active | ABS (Acrylonitrile Butadiene Styrene) | Natural | 0.070" (1.75mm) | - | 35.3Mpa | 59.8Mpa | 1.10g/cm³ ~ 1.12g/cm³ | 275°C ~ 295°C | Reinforced |
|
JA3D-C1001280PA 4500 BLK, 2.85MM, 0.75KG |
4,987 |
|
Datasheet | PA 4500 | Spool | Active | PA (Polyamide) | Black | 0.112" (2.85mm) | - | - | - | - | - | - |
|
JA3D-C1001301PA 4500 WHT, 2.85MM, 0.75KG |
3,215 |
|
Datasheet | PA 4500 | Spool | Active | PA (Polyamide) | White | 0.112" (2.85mm) | - | - | - | - | - | - |
|
JA3D-C1001059PC 1500 FR, 2.85MM, 1KG SPOOL |
3,563 |
|
Datasheet | - | Spool | Active | PC (Polycarbonate) | Natural | 0.112" (2.85mm) | - | 61Mpa | 93.9Mpa | 1.18g/cm³ | 285°C ~ 305°C | Flame-Retardant, Wear & Friction |
Frequently Asked Questions
What are 3D Printing Materials components used for?
3D Printing Materials components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right 3D Printing Materials part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can ICMENU help source obsolete or hard-to-find 3D Printing Materials parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. ICMENU will review your request and provide available stock, pricing and sourcing information.